Networking – How to add a printer to a Netgear router’s LAN

printerrouterwireless-networkingwps

I just bought a HP Deskjet 3050 wireless printer and am trying to connect it to my home network so any connected PC can print to it. The network is "served" from a Netgear WGR614v7 wireless router.

When I go into the printer's WPS settings (from the printer's on-board pushbutton/LCD screen) it gives me two options:

  • Push Button
  • PIN

I tried the button option, only to discover that my router doesn't actually have a WPS button anywhere on it (if I'm wrong, please submit a screenshot or helpful description as to where I can find it on this particular model!)

When I push the "PIN" option, it gives me a PIN and starts counting down from 4 minutes. It looks like I have that amount of time to register the PIN with my router. I log into my router at 192.168.1.1 but can't seem to find any option that lets me "Add a Device" or "Register a PIN".

How can I get this working?

Best Answer

The product page for the WGR614, as MaQleod notes, says:

Push 'N' Connect using Wi-Fi Protected Setup™ (WPS)1

I couldn't find what the 1 means, but maybe "not available on all devices".

WGR614v10

Assuming you have the WGR614v10, according to the manual, this is where the WPS button is located:

enter image description here

The instructions on how to perform the WPS operation are detailed in the manual I linked above.

WGR614v9 (and below)

Given that the term "WPS" does not appear at all in the manual for the WGR614v9, I would assume the v10 is the earliest revision that introduced the feature.

ps: Here's a nice emulator for the WGR614v9.

So what now?

To my understanding, the setup procedure in your case is quite clear.

You need to connect the printer to a computer and run the wireless setup assistant that came with the printer. If you've lost the driver CD, you may be able to find replacement software on this portal.

These are the instructions for Windows, as taken from the reference guide for the HP Deskjet 3050.

  1. Click Start > All Programs > HP > HP Deskjet 3050 J610 series, then select Connect new Printer.
  2. On the Connectivity Choice screen, click Network.
  3. When prompted to connnect the USB cabel, check the box for USB cable is already connected to continue.
  4. Use the wireless connection setup wizard. You need to know your wireless network name (SSID) and Wireless Password (WPA passphrase or WEP key) if you are using either of these wireless security methods. In some cases, the software may be able to find these for you.

enter image description here

During this setup procedure, your wireless networking information should be transferred into the printer.

If that doesn't work, then I have no clue either :)

Related Question