MacOS – How to do raw device access with VirtualBox

macosvirtualbox

So I am trying to set up raw device access w/ VirtualBox to use a ext4/linux disk as a guest OS within Mac OS X, but haven't succeeded yet.

Following the VirtualBox docs, Chapter 9.9.1.1, https://www.virtualbox.org/manual/ch09.html#rawdisk will Mac OS X allow raw disk access for VMs? How do I set this up?

Things done so far: (don't try this at home)

Created a raw vmdk file: 

$ sudo VBoxManage internalcommands createrawvmdk -filename /Users/me/VirtualBoxVMs/Xub_raw_disk.vmdk -rawdisk /dev/disk0
RAW host disk access VMDK file /Users/me/VirtualBoxVMs/Xub_raw_disk.vmdk created successfully.

make me the owner:

$ sudo chown me /Users/me/VirtualBoxVMs/Xub_raw_disk.vmdk

see if VirtualBox can see anything on the Xub_raw_disk.vmdk file:

$ VBoxManage internalcommands listpartitions -rawdisk /Users/me/VirtualBoxVMs/Xub_raw_disk.vmdk
Number  Type   StartCHS       EndCHS      Size (MiB)  Start (Sect)

Since nothing shows up here for sectors or partitions, this must be a symptom of the problem…

Problem is when I try to add the .vmdk file from the GUI or with the command below, I get an error:

$ VBoxManage storageattach "Xub_raw_testing" --storagectl "SATA" --port 0 --type hdd --medium /Users/me/VirtualBoxVMs/Xub_raw_disk.vmdk 
VBoxManage: error: Could not find file for the medium '/Users/me/VirtualBoxVMs/Xub_raw_disk.vmdk' (VERR_FILE_NOT_FOUND)
VBoxManage: error: Details: code VBOX_E_FILE_ERROR (0x80bb0004), component Medium, interface IMedium, callee nsISupports
VBoxManage: error: Context: "OpenMedium(Bstr(pszFilenameOrUuid).raw(), enmDevType, enmAccessMode, fForceNewUuidOnOpen, pMedium.asOutParam())" at line 178 of file VBoxManageDisk.cpp
VBoxManage: error: Invalid UUID or filename "/Users/me/VirtualBoxVMs/Xub_raw_disk.vmdk"

UPDATE:
Here, disk0 is the dedicated linux drive. disk1 (not used) is for Mac OS X.
Making myself the owner of the /dev/disk0 and /dev/disk0s2 with 

$ chown $USER /dev/disk0
$ chown $USER /dev/disk0s2

per the Froggard howto made it so I could add the image to a VM. Also, /dev/disk0 is now readable from VBoxManage:

$ VBoxManage internalcommands listpartitions -rawdisk /dev/disk0
Number  Type   StartCHS       EndCHS      Size (MiB)  Start (Sect)
1       0x00  0   /0  /0   0   /0  /0            976         2048
2       0x00  0   /0  /0   0   /0  /0         227959      2000896

Now, when I start the linux guest OS, I get the FATAL: No bootable medium found! System halted. message. Any ideas what's wrong?

Best Answer

I had a need to do this today and I saw your question, so here is a protocol of the steps I took.

Find the Device Number

diskutil list e.g. 2, as in /dev/disk2 Assuming 2 for the rest of the instructions.

Create the Virtual Machine VMDK

VBoxManage internalcommands createrawvmdk -filename "$HOME/dev-disk2.vmdk" -rawdisk /dev/disk2

Eject the device before this step, otherwise you will get an error: VERR_RESOURCE_BUSY. You may want to add an entry in fstab with the added parameters noauto to prevent the OS from remounting the drive.

I use rdisk-disk2.vmdk for the name, because this virtual machine is just a pointer to this device. After reboot, the situation could change e.g. a device might be assigned a different number especially if you unplug things and move things around.

Start Virtual Box Manager with Root Privileges

sudo /Applications/VirtualBox.app/Contents/MacOS/VirtualBox

Because devices are all owned by root, you need to start VirtualBox with root privileges. This has consequences. Your home context (home folder and preferences) will be changed to root. Your other virtual machines will not be visible. If you open a file browser, you will see the root's home folder by default.

Another option is to change the permissions of the device (not recommended) as you have done.

To confirm permissions of devices, you can run ls -l /dev/disk*

  1. Add New Machine, provide name: /dev/disk2, type: linux, version: arch linux (64-bit)
  2. Give it some memory (whatever you can)
  3. Select existing drive using VMDK created above. (IMPORTANT ensure the drive has not been remounted, otherwise you will get VERR_RESOURCE_BUSY, NS_ERROR_FAILURE)

Install a Fresh System

Add an optical disk file (e.g. a bootable linux ISO of your liking) and turn on the Live CD/DVD optional so that you boot from it.

Make System Bootable in VirtualBox

This is not so obvious, especially if you use an EFI setup. If using grub-mkconfig, the name of the efi file is grubx64.efi (assuming 64 bits). VirtualBox is finicky about where it looks for a boot file. The default will not do.

Rename grubx64.efi to bootx64.efi

/boot/EFI/BOOT/bootx64.efi

Notes

  • tip: get yourself iterm 2
  • This is super useful for Macbooks when installing Arch Linux, because the default ISO does not load the wlan card drivers.
Related Question