Can’t login via telnet in ddwrt

command linedd-wrttelnet

I have a Gateworks laguna 2388 router with dd-wrt firmware installed in it. It was working fine till i change "http_passwd" nvram attribute.
I wanted to change the web GUI password via telnet. So I changed the nvram attribute by using the following commands:

nvram set http_passwd=xxxx 
nvram commit
reboot

Now I can't able to login via telnet as well as in web GUI. When I try to login via telnet the console says "Login Incorrect" I aslo connected the device using a console cable, but can't able to login. Is there any way to recover the password without flashing the firmware?

Best Answer

Related Question