This is Gentoo Linux with OpenRC (updated to systemd later on), and ACPI + some power management features in the kernel for Intel. ACPId is up and running. I can suspend to ram using:
echo -n "mem" > /sys/power/state
This works, but I need to use the power button to wake up. Is there a way to wake up from keyboard events like pressing the space bar? The keyboard is a wireless USB keyboard. I've looked at the content of the script in /etc/acpi
and it offers no insight into doing this. Most of the information I find is usually geared at laptop users. Do I really need something like the old pm-utils
to accomplish this and is there anything wrong with just using acpid?
cat /proc/acpi/wakeup
Device S-state Status Sysfs node
P0P2 S4 *disabled
P0P3 S4 *disabled pci:0000:00:06.0
P0P1 S4 *disabled pci:0000:00:1e.0
PS2K S4 *enabled pnp:00:0b
EUSB S4 *enabled pci:0000:00:1d.7
USBE S4 *enabled pci:0000:00:1a.7
P0P4 S4 *disabled pci:0000:00:1c.0
P0P5 S4 *disabled
P0P6 S4 *disabled pci:0000:00:1c.2
P0P7 S4 *disabled
P0P8 S4 *disabled
P0P9 S4 *disabled
GBEC S4 *disabled
USB0 S4 *enabled pci:0000:00:1d.0
USB1 S4 *enabled pci:0000:00:1d.1
USB2 S4 *enabled pci:0000:00:1d.2
USB3 S4 *disabled
USB4 S4 *enabled pci:0000:00:1a.0
USB5 S4 *enabled pci:0000:00:1a.1
USB6 S4 *enabled pci:0000:00:1a.2
MBT4 S4 *disabled
Seemingly relevant kernel options used (3.10.25-gentoo SMP, 64bit, IA32emul=off, no-multilib):
- CONFIG_HOTPLUG_CPU=y and with cpu0_hotplug by default
- Suspend to ram and standby Hibernation
- Power mgmt debug support
- Suspend/resume event tracing
- ACPI support
- CPU idle PM support
- Cpuidle Driver for Intel Processors
- Support for systemd through Gentoo option in kernel was enabled
BIOS setup is pretty standard:
- I've enabled ACPI2.0 extra tables
- Not seeing any wake events for USB but I've tried wake up events from
PCI/PCIe/PS2 etc but indeed this is a wireless usb keyboard - Board is old school winner Maximus Formula with Q6600 Core2quad
OpenRC was updated to systemd
and the kernel was recompiled to support that. Configuration was also updated like so. With systemd, apcid is not required in all instances. For instance without running you can issue systemctl suspend
and the behavior is… the same as before i.e. wake up only from power button…
pstree
output:
systemd
├─acpid -f
├─at-spi-bus-laun
│ ├─dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork--print-addres
│ └─2*[{at-spi-bus-laun}]
├─at-spi2-registr --use-gnome-session
│ └─{at-spi2-registr}
├─dbus-daemon --system --address=systemd: --nofork --nopidfile--systemd-activation
├─dbus-daemon --fork --print-pid 5 --print-address 7 --session
├─dbus-launch --sh-syntax --exit-with-session
├─dhcpcd -q --nobackground
├─login --
│ └─bash
│ └─startx /usr/bin/startx
│ └─xinit /etc/X11/xinit/xinitrc -- /etc/X11/xinit/xserverrc :0 -auth...
│ ├─X -nolisten tcp :0 -auth /home/user/.serverauth.3329
│ └─openbox --startup /usr/libexec/openbox-autostart OPENBOX
│ ├─firefox
│ │ ├─plugin-containe ...
│ │ │ └─6*[{plugin-containe}]
│ │ └─35*[{firefox}]
│ └─vlc
│ └─4*[{vlc}]
├─lxterminal
│ ├─bash
│ │ └─htop
│ ├─bash
│ │ └─su
│ │ └─bash
│ │ └─grc /usr/lib/python-exec/python2.7/grc tail -f ...
│ │ ├─grcat /usr/lib/python-exec/python2.7/grcat conf.log
│ │ └─tail -f /var/log/emerge.log
│ ├─bash
│ ├─gnome-pty-helpe
│ └─{lxterminal}
├─mount.ntfs /dev/sdb1 /mnt/div -o rw
├─roxterm
│ ├─bash
│ │ └─su
│ │ └─bash
│ │ └─pstree -a
│ ├─gnome-pty-helpe
│ └─{roxterm}
├─systemd --user
│ └─(sd-pam)
├─systemd-journal
├─systemd-logind
├─systemd-udevd
├─wbar --pos bot-right --taskbar --isize 24
└─xcompmgr -c -C -t-5 -l-5 -r4.2 -o.55
Best Answer
This is often also a BIOS setting. You can check it with:
and enable it with