I'm running Kubuntu 13.10 on a Lenovo Thinkpad T430 laptop.
I've got a Bluetooth speaker.
After a lot of troubleshooting i managed to connect to the speaker. bt-device reports:
$ bt-device -l
Added devices:
[Samsung] W_Audio (5C:F6:DC:88:05:62)
$ bt-device -i 5C:F6:DC:88:05:62
[5C:F6:DC:88:05:62]
Name: [Samsung] W_Audio
Alias: [Samsung] W_Audio [rw]
Address: 5C:F6:DC:88:05:62
Icon: audio-card
Class: 0x240404
Paired: 1
Trusted: 1 [rw]
Blocked: 0 [rw]
Connected: 1
UUIDs: [AudioSink, AVRemoteControlTarget, AVRemoteControl]
When i connect to the speaker, it plays a welcoming sound. When i click "Audio Sink" in the bluetooth manager (it's BlueMon i think), the speaker plays another sound, and a "Success" message appears in the bluetooth manager.
But the bluetooth audio does not appear anywhere in settings. There is no option to direct sound to the speaker. All the sound comes from laptop speakers and the bluetooth speaker is silent.
I installed pulseaudio and pavucontrol (with a bunch of other pulseaudio- and bluetooth-related packages). Pavucontrol on the Output Devices tab shows only the main audio device, but according to guides over the web, bluetooth audio should appear there.
So… Once i have the bluetooth speaker connected, how do i direct sound there?
Some dumps that might be relevant:
$ pacmd list-sinks
Welcome to PulseAudio! Use "help" for usage information.
>>> 1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9959
volume: 0: 86% 1: 86%
0: -3,93 dB 1: -3,93 dB
balance 0,00
base volume: 100%
0,00 dB
volume steps: 65537
muted: no
current latency: 5,62 ms
max request: 1 KiB
max rewind: 64 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 3
configured latency: 5,80 ms; range is 0,50 .. 371,52 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC3202 Analog"
alsa.id = "ALC3202 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2530000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Intel PantherPoint HDMI"
alsa.components = "HDA:10ec0269,17aa21f3,00100203 HDA:80862806,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-speaker>
$ pacmd list-sources
Welcome to PulseAudio! Use "help" for usage information.
>>> 2 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 1950
volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
base volume: 100%
0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 64 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 2
linked by: 2
configured latency: 20,00 ms; range is 0,50 .. 371,52 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 5
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2530000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9959
volume: 0: 0% 1: 0%
0: -inf dB 1: -inf dB
balance 0,00
base volume: 10%
-60,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 20,00 ms; range is 0,50 .. 341,33 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC3202 Analog"
alsa.id = "ALC3202 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2530000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Intel PantherPoint HDMI"
alsa.components = "HDA:10ec0269,17aa21f3,00100203 HDA:80862806,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-microphone-internal: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-microphone-dock: Dock Microphone (priority 7800, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-microphone: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-microphone-internal>
Best Answer
To enable Bluetooth audio device discovery in Pulse Audio we need to make sure we had loaded the bluetooth packages for pulseaudio (pulseaudio-module-bluetooth
should be installed by default).
The module-bluetooth-discover then is responsible to add a bluetooth audio device as sink (or source in HSP/Telephony mode) to the known audio devices.
To load this module we can issue
To always load this module on startup of the pulseaudio sound server we add the following lines to our
/etc/pulse/default.pa(or to our custom user-based~/.pulse/default.pa, or~/.config/pulse/default.paresp., if this file exists):