UEFI – No Bootable Device Error Message on UEFI After Installation

After several hours I finally found a solution, and I cant believe how mind boggling this was. This is what you should do for your Acer Aspire ES series if you want to install Ubuntu.

The main problem is that the BIOS is preventing you from booting anything up but UEFI compatible systems, such as Ubuntu.

1. Start BIOS by pressing F2.

2. Disable Secure Boot and change the order of the boot sequence to boot on USB. (My particular Laptop does not have a CD-ROM drive and requires USB as the only option.)

3. Boot on USB and select to run Ubuntu in live test mode that allows you to get access to terminal commands.

4. Open terminal and run sudo ubiquity -b to run the installation process for Ubuntu.

5. Select "Something else" to customize your own partitions.

6. Create the following partitions as a minimum:

   • The / to store the file system
   • The swap space
   • The UEFI space

7. Install Ubuntu and press Continue Testing after installation is over.

8. Mount newly installed file system into:

   sudo mount /dev/sda2 /mnt
   sudo mkdir /mnt/boot/efi
   sudo mount /dev/sda1 /mnt/boot/efi
   for i in /dev /dev/pts /proc /sys; do sudo mount -B $i /mnt$i; done
   

   (where sda2 is the root partition and sda1 is the efi partition)

9. Load efivars: sudo modprobe efivars.

10. Reinstall GRUB:

    sudo apt-get install --reinstall grub-efi-amd64
    sudo grub-install --no-nvram --root-directory=/mnt /dev/sda
    

11. Update the installed GRUB:

    sudo chroot /mnt
    sudo update-grub
    

12. Move and rename the installed bootloader:

    cd /boot/efi/EFI
    cp -R ubuntu BOOT
    cd BOOT
    cp grubx64.efi bootx64.efi
    

Thanks to Sladek90 for the grub tutorial here: Unable to install Ubuntu on Acer Aspire ES1-533