Beforehand

With the currently used input driver system it is not possible to change the scroll speed of your mouse, at least not without drawbacks. You are able to adjust the scroll speed for Qt-Applications using a KDE Settings but the only current way to change the scrolling in a generic fashion is by using imwheel which seems to be problematic in many ways (see comments). In the future this will be fixed with libinput and the systemd hardware database.

Current Way

Install imwheel with the following command or from the Software Center:

$ sudo apt-get install imwheel

Create (if necessary) and edit the configfile ~/.imwheelrc with an editor of your choice (e.g. gedit). Fill in the following for increasing the scroll speed for every Command. NB: This configuration file will apply these new scroll settings to all programs, (including the terminal, which may not be what you want).

".*"
None,       Up,     Up,     3
None,       Down,   Down,   3

If you want to only apply these settings to Chrome, for instance, use these settings instead:

".*-chrome*"
None,       Up,     Up,     3
None,       Down,   Down,   3

The 3 is a scroll multiplier to increase the effectiveness of the scroll wheel. In the README of the project it is called "REPS". The readme states:

[ REPS ]

Reps (Repetitions) lets you say a number for how many times you want the output keysyms to be pressed. See the chart on the default bindings for the default number of reps for each modifier-combo (The chart is near the end of this document).

In other words, it is a scroll multiplier. If REPS is set to 3, that means that when your mouse wheel commands one scroll command, the software intercepts this command and sends 3 commands to the PC instead of 1, thereby making it scroll 3 times farther, or "faster".

For more information also take a look at the manpage:

$ man imwheel

or refer to the README of the project.

You can start imwheel by typing:

$ imwheel

Be sure that you don't start the imwheel twice! That's a known bug, but you can stop imwheel with the command:

$ killall imwheel

To get imwheel to automatically start every time your computer boots, you must add it to the startup menu AFTER an x-window is loaded. IMPORTANT: since imwheel relies on an x-window to already be running, it will NOT work if you add it to crontab, /etc/init.d, or /etc/rc.local. That means you must do it this way instead:

Ubuntu:
Use the "Startup Applications" GUI editor to Add imwheel as a Startup Program: https://askubuntu.com/a/48327/327339

Xubuntu:
Use the "Session and Startup" GUI editor --> Application Autostart --> Add to add imwheel as a startup program.

More screenshots here: https://askubuntu.com/a/369443/327339.

Future

This tutorial is currently under development.

libinput seems to be included with Wily Werewolf (15.10) where you need to install the package xserver-xorg-input-libinput. After you installed libinput with

$ sudo apt-get install xserver-xorg-input-libinput

it should be used for every input after you restarted the Xorg (logout would be sufficient). Now that you are using libinput you are able to adjust the settings of your mouse. You can find a full tutorial in the file /lib/udev/hwdb.d/70-mouse.hwdb. Let me cover here only the basics.

The following steps are need to be done as root. Because of that I am friendliy reminding you that everything you do you need to take responibility.

First get the vendor id <vid> and the product id <pid> using lsusb. Here with a MX 518 Logitech Mouse as example. If you have the following line in the output of lsusb.

Bus 005 Device 002: ID 046d:c051 Logitech, Inc. G3 (MX518) Optical Mouse

The <vid> is 046d and the <pid> is c051.

Then create a File that looks like the following with gksudo gedit /etc/udev/hwdb.d/71-mouse-local.hwdb

mouse:usb:v<vid>p<pid>:name:*:
    MOUSE_WHEEL_CLICK_ANGLE=??

For example this file for the Logitech MX 518 example above:

mouse:usb:v046dpc051:name:*:
    MOUSE_WHEEL_CLICK_ANGLE=30

This file sets the mouse wheel click angle to 30° (default is usually 15). To use this setting, update the hwdb with the following commands:

udevadm hwdb --update
udevadm trigger /dev/input/event${id}

One can figure out the ${id} using xinput (look out for the id of your mouse) and then run xinput list-props ${xinput_id}.

How to adjust mouse speed in KDE

• without enabling mouse acceleration
• and only using the settings dialog (no console, no config files)

This is a colloquial summary of exhuma's answer, don't forget to upvote it.

In KDE, mouse acceleration is not logarithmic. That is, it has two constant mouse speeds: non-accelerated and accelerated. It switches from one to another when you jerk the mouse quickly enough.

The first speed is non-configurable (at least, from GUI). The second speed is configurable.

The solution is:

1. Set "Pointer threshold" to 0. As a result, the second speed will be applied at all times.
2. Adjust "Pointer acceleration" to make that speed higher or lower.

You will end up with a constant, non-dynamic cursor speed adjusted to your liking.