Ubuntu – Chromium doesn’t play sound

Preface

I was able to replicate Dave's issue in experiments, and they lead me to believe that Flash is somehow sending the sound to PulseAudio in such a way that it creates a lot of network traffic (think lots of tiny packets, not bandwidth); this overwhelms the network "tunnel" PulseAudio has created, i.e. you have

Youtube => [PA-client => network => PA-server] => speakers

I could solve the issue by putting both the client and server on their own virtual network, giving them effectively infinitely fast connectivity (10 Gbits/sec) between them; obviously, that doesn't work for real-world networks :)

So, a bit of googling and this post and this one gave me the idea of dropping the tunnel (middleman, as Dave aptly put it), and having the client talk directly to the server, i.e.

Youtube => network => PA-server => speakers

And that worked for me; Flash videos/sound play flawlessly.

Let's try it!

This assumes your client-server are on a local network (router, etc.)

1. Preliminary: On the client machine, if you have an existing setup, open paprefs and uncheck everything; then kill PulseAudio to be sure.

2. On the server machine (i.e., the one with the speakers), start PA Preferences (paprefs) and set it up as follows:

   

   • Then close it, and kill PulseAudio in a terminal as shown, wait, and check that it is now listening on port 4713:

   

   • If you don't see it, open paprefs again and check the remaining boxes in the Network Access and Network Server tabs (they don't hurt)

   • Make sure you know the server's IP address - use ifconfig, etc. We'll use 192.168.0.4 in our example.

3. On the client machine, open a terminal, and test our direct connection first, with a speech sample WAV (replace 192.168... with your server IP!)

   wget http://www.signalogic.com/melp/EngSamples/Orig/female.wav
   paplay --server=192.168.0.4:4713 female.wav
   

   • Abort with Ctrl-C if it works, it can get boring ;)

Now, close all running browser instances, and then start it (assuming Firefox here with the following syntax):

PULSE_SERVER=192.168.0.4:4713 firefox &

• Replace 192... with the appropriate IP for your server!

• In that Firefox instance, open up Youtube (or whichever Flash video site), and try playing videos back --- fingers crossed, it should work without stuttering/pausing!

Make it stick

If you want to make this fix apply to all programs instead of having to put PULSE_SERVER=192.168.0.4:4713 in front of every command, edit /etc/environment on the client and add PULSE_SERVER=192.168.0.4:4713 on a new line at the end of the file. Also add a line break at the end.

This will make all sound on the client go to the Pulseaudio server, so be sure that's what you want before making this edit to your /etc/environment file.

Reboot, and enjoy a smooooooth audio experience. ;)

From https://wiki.ubuntu.com/PulseAudio try from gnome-terminal

$padsp mplayer /path/to/your/file

If it doesn't work build your own mplayer from svn snapshot

1. Remove your mplayer
2. Install a C toolchain
3. Install yasm $sudo apt-get install yasm
4. Install dev pulse $sudo apt-get install libpulse-dev
5. Install git $sudo apt-get install git
6. Download the mplayer snapshot from http://www.mplayerhq.hu/MPlayer/releases/mplayer-checkout-snapshot.tar.bz2
7. untar the snapshot
8. from the mplayer source folder do a $./configure --enable-pulse
9. then $make
10. and finally do $sudo make install

Note before you do the step 8; you can play with configuration by doing $./configure --help to see those available configuration.

Oh and lastly ./configure and make might take time so grab some refreshment's and enjoy!!

Happy Hacking!!