Ubuntu – Can’t set CFQ elevator on Kubuntu 19.04

You can not choose CFQ scheduler in Kubuntu 19.04 since it has been removed from the 5.0 kernel. In my case I need CFQ because it gives the best performance with my rotating hard drive when running a virtual machine with Windows 10 as guest S.O, the other schedulers make the system unusable. Kubuntu 19.04 in the installation by default only offers 2 elevators mq-deadline and none that in my case offer a performance much worse than CFQ.

sudo cat/sys/block/sda/queue/scheduler
mq-deadline none

Only I have to try with 2 other schedulers that do not appear in the installation by default, these scheduler are BFQ and Kyber.

Next I will describe how to enable the BFQ and Kyber modules

1) First verify that the modules exist in the system with the following commands:

sudo modprobe bfq
sudo modprobe kyber-iosched

if there was no error you can verify that the modules are loaded with the command

sudo cat/sys/block/sda/queue/scheduler

which must return

mq-deadline [bfq] kyber none

2) make these modules load with the system start:

sudo -i
echo kyber-iosched > /etc/modules-load.d/kyber-oisched.conf
echo bfq > /etc/modules-load.d/bfq.conf

3) The next step is to tell the system which scheduler to use, then a file is created if it does not exist:

/etc/udev/rules.d/60-scheduler.rules

with the following lines

# set cfq scheduler 
ACTION=="add|change",KERNEL=="sd[a-z]",ATTR{queue/rotational}=="1",ATTR{queue/scheduler}="bfq"
ACTION=="add|change",KERNEL=="sr[0-9]",ATTR{queue/rotational}=="1",ATTR{queue/scheduler}="bfq"

if instead of BFQ you want to try kyber, replace the last word of the line where it says "bfq" with "kyber"

4) make the system recognize the changes

sudo udevadm control –reload; sudo udevadm trigger

and the changes are verified with

sudo cat/sys/block/sda/queue/scheduler

mq-deadline kyber [bfq] none

Finished.

Sources:

https://community.chakralinux.org/t/how-to-enable-the-bfq-i-o-scheduler-on-kernel-4-12/6418

https://unix.stackexchange.com/questions/375600/how-to-enable-and-use-the-bfq-scheduler#376136