I am building a new PC (my first one) at the moment. I have an ATX PSU and ATX case already, and my budget for new parts is rather limited. The only motherboard in my price range that does what I want is a microATX motherboard. I've read that you can use MicroATX motherboards with ATX cases, but can you do so while using an ATX PSU aswell?
Use an ATX PSU, ATX case and MicroATX motherboard together
atxmicro-atxmotherboardpower supply
Related Solutions
Motherboards follow standard specifications.
These specifications include many different metrics and details, such as motherboard dimensions, features, etc.
Modern computer chassis (cases) are ATX standard. Most of the cases you will be looking at are ATX. However there are options around this.- ATX motherboards will always fit into ATX cases.
- microATX motherboards should always fit into ATX cases (but some cases are dumb, so check first).
- miniITX is another specification, which you will probably not deal with, and it does not fit into ATX cases.
- Wide ATX motherboards typically will not fit into standard ATX cases, so if you want a wide motherboard, also known as Extended ATX, you will need a specific case that supports it.
Read 1
Fitting a motherboard into a case is for the most part straight forward. There are some things you will need to know.
Take these into account:
I/O shield.
The I/O shield / I/O ports are the ports that have the USB ports, the network port, the sound ports, and stuff like that. Each motherboard will come with a metal sheet that has holes that correspond to the ports for your motherboard. You will see in the case that it already has one, pop it out and use the one provided with the motherboard.
Make sure you install the I/O shield as one of the first steps, before putting the motherboard in. If you do not, you will have to remove the motherboard to insert it. Also pay attention to the "tabs" on the I/O shield -- these are supposed to touch the top of the connectors on the motherboard, to reduce EM emissions. Make sure you don't trap them against the case.Risers.
All cases will come with "risers", they are little screw like things which make it so the motherboard safely secures to the case without grounding the motherboard.
Make sure you match up all the riser spots in the case with the motherboard holes. The hole positions on the case and motherboard are standardized. Then make sure each hole on the motherboard has the corresponding riser in place, so you can screw it down to them when the motherboard is in place. Some holes will not be necessary, this is why checking positions first is necessary.Connect all power connectors on the motherboard, and reference the manual to make sure the ones you are plugging in are necessary. Also make sure to follow the "front IO" guide in the manual, this is so the power/reset/HDD LED are properly setup.
That's most of it. If you get stuck, look up howtos online to fill the gap.
Suppose you disconnect your machine's motherboard from its current PSU and then connect it to a new PSU that supplies a lot more power.
That's not how electricity works. The nominal power is the maximum amount of power PSU is able to deliver. It's not the PSU that delivers constant amount of power, it's other components that draw power from it.
At any time your hardware will receive as much power as much is required, unless it's more than PSU's nominal power, in which case something will fail. Connecting your MoBo to a new PSU with higher nominal power won't cause computer to draw more power.
The best way of preventing PSU-related failures is not being cheap and buying a sound PSU.
- High quality PSUs have better failure protection mechanisms.
- They provide more stable voltage, thus making your MoBo last longer. (Damaged capacitors are probably the most common cause of MoBo failures and they are caused by unstable voltages on PSU)
- They are quieter.
Best Answer
YES.
A micro-atx motherboard will work fine with an ATX case and power supply. Atx cases normaly included the standoff mounts for smaller mirco-atx motherboards. In fact, I have a micro-ATX motherboard in a full size ATX case and power supply. MicroATX was intended to be backward compatible.
http://en.wikipedia.org/wiki/MicroATX