Windows – Troubleshoot High CPU usage by the “System” process

cpu usageperformancetroubleshootingwindowswindows 8

I have noticed that from some time my system is freezing and its probably caused by the high CPU usage which is caused by the system process.

All applications I'm running is the Skype, TeamSpeak and Chrome so it definitely shouldnt eat that amount of CPU.

You can see the problem itself and running processes in the screenshot below:

enter image description here

Sometimes CPU usage is reaching 90%, but the average usage is like 40-65%.

My PC parameters:

  • Windows 8 (customer preview)
  • Intel Core i3 – 2350M
  • 8 GB RAM

I'd appreciate any help attempt!
Regards.

–UPDATE–

As the user below posted a great answer, I have noticed that the process that is eating the most CPU in the system is called Arthurx.sys, simple google tells that it's a TPLink driver (an wifi adapter, I have bought like 2 weeks ago!) drivers has been installed from the Windows MSDN, but also tried to install the drivers from the attached CD, but it doesn't help. From the system start, it is using like 5% of the CPU only, but after 2-4 hours of working it is growing up and reaching 40-60% of the CPU usage.

Device name: TPLink WN722N

Best Answer

Introduction

High CPU usage by the "System" process can often be caused by a hardware driver issue (bug, old version, incompatility etc).

The System process loads (or hosts) multiple hardware drivers from different vendors that require higher level of memory access. This is why diagnosing the specific culprit can require a bit of detective work as described below.

Diagnosing the issue

To diagnose the CPU usage issues, you should use Event Tracing for Windows (ETW) to capture CPU Sampling data / Profile.

To capture the data, install the Windows Performance Toolkit, which is part of the Windows SDK.

The Windows 10 WPT can be used on Windows 8/Server 2012, Windows 8.1/Server 2012R2 and Windows 10/Server 2016. If you still use Windows 7, use the SDK/WPT with Build 15086.

enter image description here (all other entries can be unselected)

Now run WPRUI.exe, select First Level, under Resource select CPU usage and click on start.

enter image description here

Now capture 1 minute of the CPU usage. After 1 minute, click on Save.

Now analyze the generated ETL file with the Windows Performance Analyzer by dragging and dropping the CPU Usage (sampled) graph to the analysis pane and ordering the columns like you see in the picture:

enter image description here

Inside WPA, load the debug symbols and expand Stack of the SYSTEM process. In this demo, the CPU usage comes from the nVIDIA driver.

In the following demo, the CPU usage comes from the Realtek NIC driver:

enter image description here

When you see calls like ntoskrnl.exe!ViKeTrimWorkerThreadRoutine, ntoskrnl.exe!MmVerifierTrimMemory, ntoskrnl.exe!VerifierKeLeaveCriticalRegion, this means you have Driver Verifier enabled. This also hurts performance a lot and causes high SYSTEM usage. Disable Driver Verifier and reboot.

enter image description here

In this demo, the driver iai2ce.sys (Intel Serial IO GPIO Controller driver) causes it:

enter image description here

In this example, the CPU usage comes from the file rtsuvc.sys which seems to be the Realtek UVC webcam Driver

enter image description here

This demo shows that Bitdefender driver ignis.sys

enter image description here

In the following example, the CPU usage is casued by the broadcom network driver bcmwl664.sys

enter image description here

When you see ntoskrnl.exe!MiZeroWorkerPages as cause, it is trickier. This means the function of the kernel which zeros the memory before it can be used again causes the high CPU usage:

enter image description here

There is no real way to detect which process causes it, but I know that Chrome can cause it if you have hardware acceleration enabled in Chrome. So if you see this and use Chrome, turn hardware acceleration in Chrome off.

When you see those ntoskrnl.exe!RtlpGenericRandomPatternWorker, ntoskrnl.exe!RtlpTestMemoryRandomUp calls

enter image description here

the CPU usage comes from the Kernel to test memory for issues (memtest). This usage is triggered via the idle maintenance task of Windows 8.1/10. You can use Task Scheduler to disable the idle task.

enter image description here

In Windows 10, the task is called RunFullMemoryDiagnostics under Microsoft > Windows > MemoryDiagnostic > RunFullMemoryDiagnostic.

enter image description here

In this case, the CPU usage seems to come from the Data Deduplication Feature (dedup.sys!DdpPostCreate) of Windows Server:

enter image description here

In this demo, the CPU usage is caused by the WIFI card driver athrx.sys

enter image description here

Search for a driver update if you see this.

In the following demo, a citrix driver is involved:

enter image description here

So contact your IT for how to solve Citrix issues.

In this demo, the function usbhub.sys!UsbhPortRecycle causes the CPU usage:

enter image description here

Changing USB2.0 ports to 1.1 speed or connecting USB drives to other USB 2.0 ports helped for some users.

In this case, a small amount of SYSTEM usage comes from the Acronis driver tdrpm251.sys:

enter image description here

In this demo, the CPU usage ntoskrnl.exe!KeAcquireSpinLockRaiseToDpc and ntoskrnl.exe!KeReleaseSpinLock.

enter image description here

so a driver is using SpinLocks very heavily. Disable some devices/drivers until you see one which causes it.

In this case, the CPU usage is caused by the driver L1C62x64.sys

enter image description here

This is the qualcomm atheros AR8171/8175 PCI-E gigabit Ethernet driver. So update the driver if you see it in the stack.

Here, the CPU usage comes from scanning the host file (netbt.sys!DelayedScanLmHostFile)

enter image description here

make sure your hosts file is not too large to avoid this usage.

In this case, the CPU usage comes from SRTSP64.SYS from symantec.

enter image description here

Update your used symantec product to the latest version.

Here, the CPU usage comes from the AMD GPU driver (atikmdag.sys)

enter image description here

if you see this, go to AMD site and get the latest driver for your AMD card.

Here, the drivers TMXPFlt.sys and VsapiNt.sys cause the high CPU usage.

enter image description here

From what I see, those files are part of Trend Micro AV suite. Update the tool or remove it.

In this example, the CPU usage comes from the function ntoskrnl.exe!MmGetPageFileInformation

enter image description here

This function gets information about the pagefile.

Routine Description: This routine returns information about the currently active paging files.

Disable the pagefile, reboot and enable it again and see if this fixes it. Also, removing Intel services (e.g Intel Content Protection HECI Service) seems to fixed it for a user.

Here, you can see that the driver Netwtw04.sys (Intel Wifi driver) calls the function flushCompleteAllPendingFlushRequests and this causes a high CPU usage.

enter image description here

Because the debug symbols get loaded the Windows inbox driver is used. Only here we can get debug symbols to see the callstack with the function name flushCompleteAllPendingFlushRequests.

Here, you should install the latest driver from Intel to fix it.

The most complicated case of SYSTEM usage is ACPI.sys usage in the callstack:

Line #, DPC/ISR, Module, Stack, Count, Process, Weight (in view) (ms), TimeStamp (s), % Weight
6, , ,   |    |- ACPI.sys!ACPIWorkerThread, 40246, , 39.992,941063, , 4,13
7, , ,   |    |    ACPI.sys!RestartCtxtPassive, 40246, , 39.992,941063, , 4,13
8, , ,   |    |    ACPI.sys!InsertReadyQueue, 40246, , 39.992,941063, , 4,13
9, , ,   |    |    ACPI.sys!RunContext, 40246, , 39.992,941063, , 4,13
10, , ,   |    |    ntoskrnl.exe!KeReleaseSpinLock, 40246, , 39.992,941063, , 4,13
11, , ,   |    |    ntoskrnl.exe!KiDpcInterrupt, 40246, , 39.992,941063, , 4,13
12, , ,   |    |    ntoskrnl.exe!KiDispatchInterruptContinue, 40246, , 39.992,941063, , 4,13
13, , ,   |    |    ntoskrnl.exe!KxRetireDpcList, 40246, , 39.992,941063, , 4,13
14, , ,   |    |    ntoskrnl.exe!KiRetireDpcList, 40246, , 39.992,941063, , 4,13
15, , ,   |    |    |- ntoskrnl.exe!KiExecuteAllDpcs, 40198, , 39.945,173325, , 4,13
16, , ,   |    |    |    |- ACPI.sys!ACPIInterruptDispatchEventDpc, 27565, , 27.408,930428, , 2,83
17, , ,   |    |    |    |    |- ACPI.sys!ACPIGpeEnableDisableEvents, 24525, , 24.384,921620, , 2,52
18, , ,   |    |    |    |    |    ACPI.sys!ACPIWriteGpeEnableRegister, 24525, , 24.384,921620, , 2,52
19, , ,   |    |    |    |    |    |- hal.dll!HalpAcpiPmRegisterWrite, 24421, , 24.281,015516, , 2,51
20, , ,   |    |    |    |    |    |    |- hal.dll!HalpAcpiPmRegisterWritePort, 24166, , 24.027,316013, , 2,48

this is extremely difficult to debug. In a sysinternals topic, I listed some advice:

  • make sure the CPU doesn't overheat because of dust in the CPU fan
  • update or re-flash the (same) BIOS/UEFI
  • load default BIOS/UEFI settings
  • make sure the battery is not damaged, remove the battery from the notebook or disable the battery in device manager.
  • change jumper on HDD caddy if you have replaced the DVD/Blue-Ray Drive with a Caddy to install an SSD next to your old HDD

enter image description here

In the following demo, the Intel HD driver igdkmd64.sys in version .4574 for the Intel HD 630 causes the issue:

enter image description here

The solution is to update to driver with version of at least .4590.

In the following case, the CPU usage of the SYSTEM process is caused by the driver stdriverx64.sys

enter image description here

This seems to be an audio streaming driver. So update this software/driver if you see this in WPA.

If you see a driver called risdxc64.sys in callstack of SYSTEM that causes the high CPU usage, update the Ricoh PCIe SDXC/MMC Host Controller driver or disable the SD card reader in device manager if no driver update fixes it.

enter image description here

This SD card reader seems to be built-in to many Lenovo devices.

The user @stevemidgley showed a new issue of higher CPU usage with Wdf01000.sys!FxSystemWorkItem::_WorkItemThunk

enter image description here

Here you can see a driver UDE.sys causing it.

In symbol hub

enter image description here

I can see it belongs to Modem driver and PNP data of the trace shows Fibocom L850-GL (LTE Modem) as possible device:

enter image description here

And the solution is to disable the modem and USB composite device in device manager.

The user @fajar provided the following case:

enter image description here

Here the cpu usage is small, but if you change the view to DPC/ISR usage

enter image description here

you can see that the avgNetHub.sys driver causes a lof of DPC usage

enter image description here

The name indicates that this driver is part of AVG anti virus software. So update the software or remove it if you see this in your trace.

Related Question