I tried the "Erase the Solid State Drive in the HDD bay" BIOS feature following these instructions. The message "Now erasing… It may take about 6 minutes." came up. After waiting over three hours, I dismissed the warning to not turn off the laptop. (There wasn't much else I could do.)
Now my X301 laptop just hangs at boot. I can't even get into BIOS setup or select a boot device. I think what happened to me is similar to this story, however, I can't even tell if my SSD is password-locked.
If I physically disconnect the SSD, I am able to get into the BIOS setup and even select a boot device. The laptop functions fine when booted to Ubuntu installed on a USB drive. So I am pretty sure the problem is with the SSD. Thus the questions are, "Did Lenovo BIOS secure erase brick my SSD, and how do I make the SSD functional again?"
Best Answer
I have seen similar issues in the past.
On some motherboards, the detecting hard drive / hard drive auto discovery stage can hang if a hard drive is corrupt, badly formatted or damaged in some way.
If you pulled the drive whilst it was in the middle of an operation, anything is possible and anything would be a guess.
My guess based on previous experience is that it has become corrupt and as I said, failing the discovery stage of the BIOS. If your BIOS and the port support hot swap, I would recommend putting the drive in after you have gone over that step and seeing if you can reformat the drive.
(Personally, I came up with something similar on Gigabyte motherboards with hard drives after turning on AHCI mode, formatting from another machine after hot-swapping worked fine).