My ASUS P8Z68-V PRO/GEN3 motherboard has the following fans:
- 2 x Chassis Fan connector(s) (1 x 4-pin, 1 x 3-pin)
- 2 x Power Fan connector(s) (3-pin)
The fan cable connector has three pins (and it already has molex attached to it).
What I know until now is that (correct me, if I am wrong):
- The connector (with molex) can be connected to power-supply
- The connector (without molex) can be connected to motherboard (if it supports) to regulate the fan (without having the fan to be on all the time)
What should I connect my case fan to, if I want to connect it to the motherboard? Please note that this is my first build.
Best Answer
Well, all three options are possible.
The chassis fan option is definitely the best option - it will do speed control, and will keep the fans running at the required speed. Where possible, this is the best option. Use the chassis fan controllers first
The molex/fan connector connected to a molex connector will have the fan running at full speed all the time, unless you have a fan controller. You'll notice the 'converter' you have only has two pins, since computer fans gracefully degrade down with lesser wires - 2 wires are fixed speed, 3 wires have PWM for speed control and 4 wires also do speed feedback. This will as such, run your speed controllable fan at a single speed, controllable by voltage
As for pwr_fan - various sources source 1 source 2 say that it won't control the fan speed and Its proper use is for monitoring PSU fans where supported. If you have more fans than chassis fan connectors, you could presumably use this as it should be possible to power a fan off it, however. Practically this would be preferable if you didn't want to use a molex connection specifically for fan power, but its not a replacement for a proper chassis fan supply.