Possible to SSH or Telnet into D-Link Consumer-level routers

I would like to clarify Brian:s answer about Hamachi, with a Linux focus.

First install it:

wget https://secure.logmein.com/labs/logmein-hamachi_2.0.1.13-1_i386.deb
sudo aptitude install lsb
sudo dpkg -i logmein-hamachi_2.0.1.13-1_i386.deb 

Then go to the hamachi page and create a new mash network, remember the "network-number" since the do-login needs it.

Back to the command line

sudo hamachi login
sudo hamachi set-nick $HOSTNAME
sudo hamachi do-join XXX-XXX-XXX

Then back to the webpage again and allow the clients to be on this network. (maybe need to have the client to login again)

Then check what pc is on the network:

sudo hamachi list

Now you can grab that ip-number and ssh directly regardless if there is a NAT in the way!

/Have fun

I recommend following these steps in the future: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=29181

nvram set httpd_enable=1
nvram set http_enable=1
nvram commit

you can just reboot, or start httpd from the commandline

httpd -p 80

I followed them and got mine to work