Mac – Photoshop gradients just got ugly

Filter > Noise > Add Noise...

EDIT: If it's on a layer style (good info to add), you can right click the FX button next to the layer, and select "Create Layers". This will split the gradient overlay onto its own layer. Then apply a noise filter to that layer.

Disabling the ATI/AMD kernel extensions will not force the OS to switch to the Intel integrated graphics. It's a misconception in all the fixes/instructions out there... All that does is running the discrete chip with a fallback driver with no graphic acceleration. This is akin to seeing the "640x480 VGA" standard display mode on Windows back in the day whenever it cannot load the proprietary GPU driver. Same GPU is being used, just not at its full capacity.

Here is what happens after disabling the AMD/ATI extensions:

• The black screen (no display) problem is usually fixed.

• However there is no graphic acceleration.

• Existing or new graphics defects(blue or pink bars/lines, jagged/out-of-order image, noise, etc.) will show up as temperature fluctuates (running GPU at high temp, power on/off, etc.), presumably due to the lead-free solder problem.

• The defects are present at the boot time.

• The internal LCD is treated as an external monitor, with only one possible resolution: the maximum display resolution (1440x900 or 1680x1050).

• When the laptop LCD is used, it stays on full brightness and does not turn off when the lid is closed. This physically damages the screen as time goes (doesn't take long, several weeks will do).

• A Thunderbolt external display can be used if the laptop lid is shut at the boot time (before image showing up on the laptop LCD).

• Only one display device is recognized, either the laptop LCD or an external Thunderbolt monitor. There is no mirroring or extending when using an external monitor.
• The laptop LCD will stay off when using an external monitor.

The only method I know that triggers the integrated graphics switch is the overheat-shutdown method.

0 (optional). If you can get the display to show up using the disable-kernel-extensions method, set your account to auto-login. Install switchGPU or a similar tool to automate step 3 below.

1. Let the Macbook Pro overheat in a blanket or closed bag in order to force an auto-shutdown.

2. Immediately turn it back on. It should be using the integrated graphics.

3. Quickly switch to integrated graphics using gfxCardStatus (with proper setting in System Preferences/Energy Saver).

The problem with this method is that the OS will switch to discrete graphics whenever you run some app that uses graphics acceleration. So this is not a permanent solution.

The reality is, as long as the GPU BGA sits on top of those RoHS solder balls, the disable-kernel-extensions method will also start to fail at some point. The only lasting solution is reballing the GPU BGA with lead solder, if you have given up on Apple. Finding a reliable reballing service that understands temperature profiles and follows proper soldering techniques is yet another hurdle.

Update: Louis Rossmann pointed out that the problem is not with the solder balls on the board but the much smaller soldering joints within the GPU chip (see video @ 1:04: Reballing a dead horse: Q&A from my YT inbox.). It was mentioned that the actual problem may be temporarily fixed as a side effect of the reballing/reflowing process, but the only permanent solution is to replace the GPU, i.e., the whole board through Apple.

FYI, Apple's replacement program ends on December 31st 2016.