My internet speed as measured on speedtest.net is 10 Mbps from my desktop computer, which is connected via ethernet to the router. When I measure my speed from my laptop (Surface Pro) when on the WiFi network using the same router, however, the measured speed is 3 Mbps. In addition, when I'm transferring files over the wireless network, Windows 8 File Explorer reports the transfer rate to be 3 Mbps as well. When I test the network using my phone (Samsung Focus WP7), I get a speed of 7 Mbps.
Device Manager reports that the drivers for the card on the Surface Pro (Marvell AVASTAR 350N) are up-to-date. How can I get my Surface Pro speed to match the speed of my internet connection?
Here are my Wireless Router settings:
Here are my Security settings on the router:
Best Answer
Not getting the full speed on WiFi might be due to a lot of things.
You can check your link-speed. If it is not 54Mbps (but far below that) you might have a lot of interference in the air. But your phone has good speed so your laptop should be able to get the same.
You can try switching to 802.11g (instead of the 11b/g/n mixed mode). 802.11n is of no use for you with the limited internet speed and 802.11b is probably not used.
Setting it to 802.11g can give you some stability (depending on the router). (it usually does for me) When you do have a modern-modem you could try 802.11n only but if you see your link speed at 65Mbps with that mode it might be better to choose 802.11g for stability because your modem does not give you the full 802.11n speeds.
Also use a reliable (and several/different) speedtests because they can vary greatly. For example with some speedtest i get 5Mbps while i have 150Mbps. http://www.speedtest.net works nicely for me. They also have a mobile app (http://www.speedtest.net/mobile) so you can compare the phone speed to you laptop.
(The app for Windows Phone should be here, there is a link to the store on the mobile page mentioned above)