Crimping T568A vs. T568B color scheme: Does it matter electrically

Wikipedia has pinouts for a gigabit crossover cable.

Note that while Auto-MDIX is an optional feature of the gigabit ethernet specification (IEEE 802.3-2008: "Implementation of an automatic MDI/MDI-X configuration is optional for 1000BASE-T devices"), most gigabit ethernet interfaces do implement it, so in most cases you will not need a special crossover cable.

First and foremost it is absolutely critical that both ends match (at least with respect to wires that are actually used). If a given color originates on pin 3 on one end that same color must be tied to pin 3 on the other end. (This is contrary to phone cables where opposite ends are mirror images.) If you use a coupler to join two cables the coupler has a built-in "twist" so that this all works out.

Second (not quite as critical at lower speeds) the pairs must be kept together. That is, there is a "send" pair and a "receive" pair, and the wires of the pairs are twisted together. If you get one wire of the "send" pair twisted with one wire of the "receive" pair then you can get "crosstalk" which will introduce errors and slow things down (if not halt things entirely).

The pairs are not assigned to pins in an entirely logical sequence. The pairs are 1-2, 3-6, 4-5, 7-8. That is, three of pairs are adjacent pins, but one pair straddles the adjacent pins of the center pair.

Otherwise, electrons are color blind, so it doesn't matter which colors you tie to which pins, so long as the pairing is maintained. (Some claim that there is an ordering/positioning of the pairs in the cable and using the wrong pair of pairs can cause problems, but this argument is tenuous at best.)

However, it is a good idea to stick to a standard color assignment scheme, to make it easier to get cables terminated the same way on both ends. Unfortunately, there are 2-3 "standard" schemes.