Model: Acer Aspire S7-391; 256GB SSD/4GB RAM; OS: Windows 10
Before going dead, the laptop used to randomly display 'no bootable device found' warning while turning it on. But usually it booted up with two or three times using the power button. One fine day, it went off suddenly while using it on battery and since then whenever i try to power it up – there's only black screen without Acer logo. Now, the present state is whenever I power up the laptop, there is no response except the continuously glowing power LED till i manually power it off.
I tried the following solutions after reading some forums..
Connected with an external monitor to rule out the screen issues
Battery reset (pinhole)
Removed and reinstalled battery
Removed the SSD and tried to boot – still black screen. So reinstalled it
Tried hardware reset using power button and F12 key (In S7, F12 is Fn+F12)
Assuming it to be a corrupt BIOS after reading a number of forums where there are numerous reports of Acer Aspire models suffering from similar issues, i decided to do a BIOS recovery. I downloaded the "BIOS_Acer_2.18_A_A.zip" from their website and extracted the files on to the root of a "FAT32" formatted USB stick. Removed the battery out of the laptop, and plugged in the power cord. With the Fn+Esc keys held, i used the power button to turn the laptop on and then released the keys after the Power LED turned on. But there is no response (no symptoms of USB stick being read – the green LED indicator which blinks when it is read did not even blink once). I tried to rename the "isflash.fd" file to "Heliumx64.fd" as mentioned in their service manual, no luck. Now my question is – Was i supposed to change the BIOS settings (while the laptop was working) in order to do a BIOS recovery through USB stick? What are the files that are supposed to be in USB stick? I am not sure if i am missing something here! Please help!
Best Answer
It turns out that Acer's 'black screen of death' happens even when there's a minor issue such as a blown capacitor on the main-board. First thing I did when the black screen was to try and recover the BIOS as suggested by many people, however i was never able to make the ultrabook to read the USB drive. In this situation, i took it to a friend who has some knowledge on motherboard electronics and bingo - armed with a multi-meter he found out that there was a blown capacitor. He used a heat gun to remove the bad capacitor and replaced it with a good one. The moment i opened the ultrabook it started working like it did not have any problem. There it is now - it was not a BIOS issue but a blown capacitor in my case!