Seeing that the recovery model is set to simple and msdn states that the simple recovery model does not support point-in-time recovery - Does this mean that I won't be able to use my transaction log backups to restore the database in a disaster to an hour before it happened?
Even taking a transaction log backup is not supported for databases using the SIMPLE recovery model. This is a restriction of the database engine based on how this recovery model works, and the recovery features it doesn't support, as you mentioned.
A transaction log backup maintenance plan task automatically skips databases in SIMPLE recovery to avoid causing errors.
Which backup should be done first, the database backup or the transaction log backups? Articles that I'm busy reading say I should do the database backup first and then the transaction log backup else I will get maintenance plan errors, but I'm currently first backing up my transaction logs and then data databases and I'm not getting any errors.
For the reasons I mentioned above, it won't matter for databases using SIMPLE recovery, as they will be skipped by the transaction log backup task.
For databases in the other two recovery models, a full backup must exist before you start taking transaction log backups (just the first time), or you will get an error -- this is probably what the articles refer to.
Point-in-time recovery ability is normally driven by business need -- in other words, you determine how critical the data is and how much you can afford to lose, then set the appropriate recovery model to meet those needs, and finally create a backup solution.
Even though SIMPLE recovery does not support point-in-time recovery, if an hour of data loss is okay, perhaps a differential backup solution could work for you. (There are far too many variables that go into developing this kind of solution to give you a complete picture with what was provided in the question.)
A full backup in SQL Server 2008 does not break the log chain. It only resets the differential base-lsn.
You also can restore log backups after restoring from a copy only. The following script demos that:
CREATE DATABASE BakTst13;
GO
ALTER DATABASE BakTst13 SET RECOVERY FULL;
GO
USE BakTst13;
GO
CREATE TABLE dbo.tst(id INT IDENTITY(1,1));
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP DATABASE BakTst13
TO DISK = 'BakTst13_Full_1' WITH INIT,FORMAT;
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP LOG BakTst13
TO DISK = 'BakTst13_Log_1' WITH INIT,FORMAT;
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP DATABASE BakTst13
TO DISK = 'BakTst13_Full_2' WITH INIT,FORMAT;
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP DATABASE BakTst13
TO DISK = 'BakTst13_Full_C' WITH COPY_ONLY,INIT,FORMAT;
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP LOG BakTst13
TO DISK = 'BakTst13_Log_2' WITH INIT,FORMAT;
GO
USE tempdb;
GO
DROP DATABASE BakTst13;
GO
RESTORE DATABASE BakTst13 FROM DISK='BakTst13_Full_1' WITH NORECOVERY;
RESTORE LOG BakTst13 FROM DISK='BakTst13_Log_1' WITH NORECOVERY;
RESTORE LOG BakTst13 FROM DISK='BakTst13_Log_2' WITH RECOVERY;
GO
SELECT * FROM BakTst13.dbo.tst;
GO
DROP DATABASE BakTst13;
GO
RESTORE DATABASE BakTst13 FROM DISK='BakTst13_Full_C' WITH NORECOVERY;
RESTORE LOG BakTst13 FROM DISK='BakTst13_Log_2' WITH RECOVERY;
GO
SELECT * FROM BakTst13.dbo.tst;
GO
DROP DATABASE BakTst13;
It creates a database and a table and inserts 50 rows into that table. In between those inserts several backups are taken in this order:
- Full
- Log
- Full
- Full Copy_Only
- Log
Next the database is dropped and restored like this:
- 1st Full
- 1st Log
- 2nd Log
The following SELECT demonstrates that the restore was successful.
This shows that neither a COP_ONLY nor a normal Full Backup break the log chain.
Then the database is dropped again and restored like this:
- Copy_Only Full
- 2nd Log
Afterwards the SELECT demonstrates success again.
This demonstrates that you can use a COPY_ONLY full backup as the base of your Log Restore.
Differential tests
I created a DIFFERENTIAL version too:
CREATE DATABASE BakTst13;
GO
ALTER DATABASE BakTst13 SET RECOVERY FULL;
GO
USE BakTst13;
GO
CREATE TABLE dbo.tst(id INT IDENTITY(1,1));
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP DATABASE BakTst13
TO DISK = 'BakTst13_Full_1' WITH INIT,FORMAT;
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP DATABASE BakTst13
TO DISK = 'BakTst13_Diff_1' WITH DIFFERENTIAL,INIT,FORMAT;
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP DATABASE BakTst13
TO DISK = 'BakTst13_Full_2' WITH INIT,FORMAT;
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP DATABASE BakTst13
TO DISK = 'BakTst13_Diff_2' WITH DIFFERENTIAL,INIT,FORMAT;
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP DATABASE BakTst13
TO DISK = 'BakTst13_Full_C' WITH COPY_ONLY,INIT,FORMAT;
GO
INSERT INTO dbo.tst DEFAULT VALUES
GO 10
GO
BACKUP DATABASE BakTst13
TO DISK = 'BakTst13_Diff_3' WITH DIFFERENTIAL,INIT,FORMAT;
GO
USE tempdb;
GO
DROP DATABASE BakTst13;
GO
RAISERROR('------> Starting restore F1, D1, D2',0,1)WITH NOWAIT;
RESTORE DATABASE BakTst13 FROM DISK='BakTst13_Full_1' WITH NORECOVERY;
RESTORE DATABASE BakTst13 FROM DISK='BakTst13_Diff_1' WITH NORECOVERY;
RESTORE DATABASE BakTst13 FROM DISK='BakTst13_Diff_2' WITH NORECOVERY;--<--Fails!
GO
DROP DATABASE BakTst13;
GO
RAISERROR('------> Starting restore FC, D3',0,1)WITH NOWAIT;
RESTORE DATABASE BakTst13 FROM DISK='BakTst13_Full_C' WITH NORECOVERY;
RESTORE DATABASE BakTst13 FROM DISK='BakTst13_Diff_3' WITH NORECOVERY;--<--Fails!
GO
DROP DATABASE BakTst13;
GO
RAISERROR('------> Starting restore F2, D2, D3',0,1)WITH NOWAIT;
RESTORE DATABASE BakTst13 FROM DISK='BakTst13_Full_2' WITH NORECOVERY;
RESTORE DATABASE BakTst13 FROM DISK='BakTst13_Diff_2' WITH NORECOVERY;
RESTORE DATABASE BakTst13 FROM DISK='BakTst13_Diff_3' WITH RECOVERY;
GO
SELECT * FROM BakTst13.dbo.tst;
GO
DROP DATABASE BakTst13;
This takes backups in this order:
- 1st Full
- 1st Differential
- 2nd Full
- 2nd Differential
- Copy_Only Diff
- 3rd Differential
It then tries this restore route:
- 1st Full
- 1st Differential
- 2nd Differential
Step 3 fails with this error:
Msg 3136, Level 16, State 1, Line 4
This differential backup cannot be restored because the database has not been restored to the correct earlier state.
This shows that a normal full backup breaks the differential chain.
Next the database is dropped and this restore flow is attempted:
- Copy_Only Full
- 3rd Differential
Step 2 fails with the same error as step 3 above. This shows that a copy only backup cannot be used as the base for a differential restore.
Then the database is dropped again and the following restore is executed:
- 2nd Full
- 2nd Differential
- 3rd Differential
The following select proves that this restore succeeded. This shows that a COPY_ONLY Full backup does not interrupt the differential chain.
Best Answer
If the log has never been backed up, then it could have been shrunk or truncated at some point. otherwise, it would have just grown. It's also possible that it has changed to SIMPLE and back to FULL.
You have one option: try it...