bootcampdual-bootwindows
I want to install Windows 10 on a MacBook Pro 13" 2011. I don't nessearly need macOS installed on the machine. Win10 single boot would be fine.
I have a bootable WIN10 USB Installer. I tried to partition the drive via diskutil and the Win10 Installer disk tool. Everytime I get the message I can't install it on this partion.
You can boot from an external USB drive from this MacBook Pro. Use bootcamp to copy the ISO on a 8Gig (or more) USB Drive. Then boot from it by pressing option at the boot chime.
An improved procedure for installing Windows 7 can be found at Installing Windows 7 Pro 64 bit without DVD or Flash Drive
The updated steps, for installing Windows 8.1 using the procedure given below, can be found here.
My hardware and software differs from yours. I will first document how I tested my answer and then try to adapt the answer to your needs. Since this is a fairly long answer, the adaption will be given as a separate answer.
My computer is an iMac (20-inch Mid 2007). The version of OS X is 10.10.5. I will be installing Windows 7 Professional SP1 64 Bit. I have only one internal drive. It is a 1 TB hard disk using the Apple hybrid GUID partitioning scheme. Hybrid means Windows will see the drive as MBR partitioned, while OS X views the drive as GUID partitioned. I will be following Apple's recommendations and installing Window using the legacy BIOS. I also have a working internal optical SuperDrive which is not used to install Windows.
(Hint: For a better view, click on an image or open an image in a new window.)
distutil, gpt and/or fdisk) entered in a Terminal window.
Other third party tools, such as gdisk, can also be used.
Give the label for this partition the name "BOOTCAMP".Determine the disk and partition numbers of the partition named "BOOTCAMP". To do this, highlight the partition in the Disk Utility application and click the "Info" button. A popup window should appear. The values shown will be used in the next step.
The information, in this pop up window, shows the disk and partition numbers are 0 and 4, respectively. If your numbers are different, you will need to substitute your numbers in the rest of the steps. If your partition number is greater than 4, then you can not install Windows on this partition. (Technically, this may not be true, but it is beyond the scope of this answer to explain how to do so.)
Do not close the popup window.
Open the Terminal application and enter the following commands in
the Terminal window. This will set variables to be used in later
commands. In the next command, replace α with the "Disk Number"
shown in the Disk Utility popup window. The usual value for α is
0.
DISK0=/dev/diskα
In the next command, replace β with the "Partition Number" shown
in the Disk Utility popup window. The usual value for β is 4.
PARTITION=β
The next command sets the variable PARTID to the disk identifier of
the partition. This should be the same as the "Disk Identifier"
shown in the Disk Utility popup window. The usual value for PARTID
is disk0s4.
PARTID="$DISK0"s"$PARTITION"
Note: the letter s is lower case.
Close the Disk Utility popup window.
With the Disk Utility application still open, select "File→New→Blank Disk Image..." from the menu bar. In the popup window, enter the values shown below. Note: "Where:" should be the "VirtualBox" folder created in Step 4. If the Boot Camp Support Software is stored on a flash drive, you can use the default "Size:" of "100 MB".
Save As: bcssoftware
Tags:
Where: VirtualBox
Name: BCSSOFTWARE
Size: Custom... (1.5 GB)
Format: MS-DOS (FAT)
Encryption: none
Partitions: Single partition - Master Boot Record Partition Map
Image Format: read/write disk image
The popup window should appear as shown below.
Click the "Create" button.
Determine the disk number of the partition named "BCSSOFTWARE". To do this, highlight the partition in the Disk Utility application and click the "Info" button. A popup window should appear. The values shown will be used in the next step.
The information, in this pop up window, shows the disk number is 1. If your number is different, you will need to substitute your number in the rest of the steps.
Do not close the popup window.
Using the same Terminal window, enter the following to set the
variable DISK1. Replace γ with the "Disk Number" shown in the
Disk Utility popup window. The usual value for γ is 1.
DISK1=/dev/diskγ
Quit the Disk Utility.
Copy the Boot Camp Support Software to to the partition labeled "BCSSOFTWARE". I used the Finder application to do this. You can skip this step, if this software is already stored on a flash drive.
Mark your partition as active in the MBR by entering the following
in the same Terminal window. The input for the interactive command
fdisk is taken from the variable INPUT. If a password is asked
for, enter it.
INPUT=$(printf "f $PARTITION\nw\ny\nq")
sudo fdisk -e $DISK0 <<<"$INPUT"
Note: To display the value for the variable INPUT, use the
command echo "$INPUT".
Allow VirtualBox read/write access to your physical partition by entering the following commands in the same Terminal window. If a password is asked for, enter it.
diskutil unmount $PARTID
sudo chmod go+rw $PARTID
This will allow VirtualBox to install Windows on your physical partition. Note: This access will only last until OS X is rebooted.
Create the files that map the virtual partition and disk to the physical partition and disk image. In the same Terminal window, enter the following commands.
cd ~/documents/virtualbox
sudo vboxmanage internalcommands createrawvmdk -filename "$PWD/bootcamp.vmdk" -rawdisk $DISK0 -partitions $PARTITION
sudo chown $USER bootcamp*.vmdk
diskutil unmountDisk $DISK1
vboxmanage internalcommands createrawvmdk -filename "$PWD/bcssoftware.vmdk" -rawdisk $DISK1
Note: If a password is asked for, enter it.
Open the VirtualBox application and click on icon above the New label. Enter or select the values shown below, then click the "Continue" button.
Use the default settings except for the hard drive. Choose the "Use an existing virtual hard drive file" button. Navigate to the VirtualBox folder created in step 4. Open the "bootcamp.vmdk" file. Your window should appear similar to what is shown below.
Click the "Create" button.
Enter the following command in the same Terminal window.
diskutil unmountDisk $DISK1
Return to the VirtualBox application's "Oracle VM Virtual Manager" window and click on the icon above the "Settings" label. Next, click on the icon above the "Storage" label. Right click on "Controller: SATA" and select "Add Hard Disk". Choose existing disk by opening the file "bcssoftware.vmdk" stored in the folder created in step 4. The attachment "bcssoftware.vmdk" should appear as shown below.
It has been reported by other users that the "Use Host I/O Cache" box needs to be checked on if VirtualBox boot fails with error VERR_NOT_SUPPORTED.
Highlight the Empty CD/DVD and select "Choose a virtual CD/DVD file..." to attach your Windows installation iso file. (Hint: Look for the CD/DVD icons)
Click OK to close the window. Your "Oracle VM Virtual Manager" window should appear similar to what is shown below.
Before clicking the icon above the "Start" label to begin installing Windows, enter the following command in the same Terminal window.
diskutil unmountDisk $DISK1
When you reach the window shown below, select "Custom (advanced)".
In the next window, click on "Drive options (advanced)".
Select the "BOOTCAMP" partition and click on "Format". The error message shown below will disappear. Click on "Next" to continue installation.
The rest the virtual machine installation will be repeated again after booting Windows on the physical machine. Use the provided answers when the following windows first appear. When asked a second time, you can provide your own answers.
When the following window first appears, I would enter the Product Key and uncheck the "Automatically active Windows when I'm online" box.
To be safe, I would not let any updates download or install until after the Boot Camp Support Software (the drivers) is installed. Therefore, I would click on "Ask me later" in the window shown below.
VirtualBox creates a virtual Public network for your virtual machine. Therefore I would click on "Public network" in the window shown below.
Once the installation has completed on the virtual machine, you
need complete the following instructions to make a copy the MBR
bootstrap code. From the Start Menu, select "Computer" to open a
window containing the hard disk drives and devices with removable
storage. Determine the drive letters for the hard disk drive
labeled "BCSSOFTWARE" and the CD (optical) drive. The image below
shows the drive letters on my computer are D: and G:,
respectively. Your drive letters may differ from mine.
Close the window and open a Command Prompt window run as an administrator. Select "Start Menu→All Programs→Accessories", then right click on "Command Prompt" and select "Run as administrator", as shown in the image below.
In the Command Prompt window, enter the command shown below. If
necessary, substitute your drive letters for G: and D:.
G:\BOOT\BOOTSECT /NT60 D: /MBR
The results of running this command on my computer are shown below.
Close the Command Prompt window.
Copy the Boot Camp Support Software from the partition labeled "BCSSOFTWARE" to the "C:\Users\Public\Public Documents" folder. I used the Windows Explorer to do this. You can skip this step, if this software is already stored on a flash drive.
You need to prepare Windows to run on your physical Mac. Open the Windows Explorer and navigate to the "C:\Windows\System32\sysprep" folder. Open the "sysprep" application. Select "Enter System Out-of-Box Experience (OOBE)", "Generalize" and "Shutdown" as shown below. Click OK and wait for the virtual machine to shutdown.
Once the virtual machine has shutdown, quit VirtualBox. Enter the
following in the same Terminal window. These commands will update
the MBR bootstrap code, set the Windows partition identifier to 7
in the MBR and then mount the partition. The input for the
interactive command fdisk is taken from the variable INPUT. If
a password is asked for, enter it.
sudo fdisk -u -y -f $DISK1 $DISK0
INPUT=$(printf "s $PARTITION\n7\nw\ny\nq")
sudo fdisk -e $DISK0 <<<"$INPUT"
diskutil mount $PARTID
Close all other applications. Open System Preferences and select "Startup Disk". Highlight the "Untitled Windows" icon and click the "Restart" button.
If something goes wrong, you will need to hold down the "option" key at startup to return to OS X. Hopefully, nothing will go wrong and Windows will start.
When Windows finishing installing, install the Boot Camp Support
Software (the drivers). This software is either in the
"C:\Users\Public\Public Documents" folder, or on a flash drive.
On OS X El Capitan (10.11) the System Integrity Protection does not allow editing the MBR with fdisk, so disable SIP following these instructions for the duration of the install.
I ended up having to create two user accounts. If you only want one account, you have two options. First, delete one of the accounts. Second, disable one of the accounts so it will not appear. The former can be accomplished from the Control Panel, the latter requires entering the command control userpasswords2 in a Command Prompt window. For example, below is the window were one can enable or disable the rpj account. If you need help let me know.
Best Answer
Your Mac does not officially support Windows 10. However, this does not mean Windows 10 can not be installed on your model Mac. Here are some points to be aware of.
BootCamp.msifile that is to old to be used with the latest versions of Windows 10. See the question WDF VIOLATION Blue Screen after Upgrading Mac to Windows 10 May 2019 Update (1903) Edition.If you do not want or need macOS installed on your Mac, then you can just have Windows 10 installed. However, you would be better off first installing Windows 10 for a dual boot with macOS. One possible procedure which might work with your Mac is given as the answer to the question How to install Windows 10 into a 2011 iMac without using the Boot Camp Assistant, an optical (DVD) drive or third party tools?. Once you have booted to a working Windows 10, you can use the Windows 10 flash drive installer to reinstall Windows 10. This time you will need to erase all partitions to remove macOS before installing.