MacOS – Problem when extending windows partition using Disk Utility

disk-utilitymacospartition

I tried to partitioning the macOS partition to have some space to extend the Windows partition using Windows OS. When trying to switch back to Windows OS, I could not find it. Even when restarting and pressing down the Option key. I found a thread with the same problem and its solution. But when trying the solution, I had a problem. The solution was entering this code in the terminal in recovery mode:

fdisk -e /dev/disk0s4
p
setpid 4
[press enter]
flag 4
p
write
y

disk0s4 is the partition with the windows on It.

But when trying to type the first line, I received an error saying "Resource is busy".

My software is MacOS High Sierra.

If there is any help, I would be grateful.

Notes:
The link of the thread is Mac won't boot Windows partition after using disk utility.
Mac version is Macbook mid 2010.
And the Windows is Windows 7.
This was the output when executing the command diskutil list disk0 in the terminal:

/dev/disk0 (internal, physical):
#:                       TYPE NAME                    SIZE       IDENTIFIER
0:      GUID_partition_scheme                        *250.1 GB   disk0
1:                        EFI EFI                     209.7 MB   disk0s1
2:                  Apple_HFS macOS                   124.0 GB   disk0s2
3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
4:       Microsoft Basic Data Windows OS              125.2 GB   disk0s4

And the output from fdisk /dev/disk0 is

Disk: /dev/disk0    geometry: 30401/255/63 [488397168 sectors]
Signature: 0xAA55
     Starting       Ending
#: id  cyl  hd sec -  cyl  hd sec [     start -       size]
------------------------------------------------------------------------
1: EE 1023 254  63 - 1023 254  63 [         1 -  488397167] <Unknown ID>
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

Below is the output from diskutil info disk0s4.

Device Identifier: disk0s4 
Device Node: /dev/disk0s4 
Whole: No 
Part of Whole: disk0 

Volume Name: Windows OS 
Mounted: Yes 
Mount Point: /Volumes/Windows OS 

Partition Type: Microsoft Basic Data 
File System Personality: NTFS 
Type (Bundle): ntfs 
Name (User Visible): Windows NT File System (NTFS) 

OS Can Be Installed: No 
Media Type: Generic 
Protocol: SATA 
SMART Status: Verified 
Volume UUID: FA34FC24-AD79-47B7-BF7F-20928229DB81 
Disk / Partition UUID: B94B94F6-3041-44DB-AFD6-37465DCC16B1 
Partition Offset: 124860235776 Bytes (243867648 512-Byte-Device-Blocks) 

Disk Size: 125.2 GB (125197877248 Bytes) (exactly 244527104 512-Byte-Units) 
Device Block Size: 512 Bytes 

Volume Total Space: 125.2 GB (125197873152 Bytes) (exactly 244527096 512-Byte-Units) 
Volume Used Space: 67.1 GB (67050299392 Bytes) (exactly 130957616 512-Byte-Units) (53.6%) 
Volume Free Space: 58.1 GB (58147573760 Bytes) (exactly 113569480 512-Byte-Units) (46.4%) 
Allocation Block Size: 4096 Bytes 

Read-Only Media: No 
Read-Only Volume: Yes 

Device Location: Internal 
Removable Media: Fixed 

Solid State: No 
Hardware AES Support: No

Best Answer

Use Hard Disk Manager to repair and partition BOOTCAMP.

You can get Hard Disk Manager from here (https://www.paragon-software.com/hdm-mac/#) or here (includes trial reset) (https://nofile.io/f/aWdNwtb3Ry9/Hard.Disk.Manager.v1.3.873.dmg) (link will expire in 24 hrs)

enter image description here

Related Solutions

MacOS – Can’t modify partitions

Thanks @Tetsujin. The listing looked a little screwy so I was a little hesitant to go mucking around with the command-line diskutil. But I ended up doing a

diskutil corestorage list

and then

diskutil corestorage delete [UUID of 50GB Logical Volume Group]

GUI Disk Utility correctly saw the 50 GB of empty space as part of the other Logical Volume Group and I was able to delete it and merge it back in fine.

I think I messed up the Fusion Drive on the 1TB iMac (with BootCamp)

Theoretically everything is fine with your Fusion Drive. Fusion Drives look like this. Disk0 is your SSD with 121 GB and disk1 is your HDD with ~1 TB (~1.121 TB summed up).

The larger parts of your SSD (disk0s2) and your HDD (disk1s2) are pooled to a CoreStorage LVG (Fusion Drive: disk3) with a size of 967.8 GB. The rest is reserved for EFIs, a Recovery HD (alltogether ~1.3 GB) and your old Windows partition - now probably free space (~152 GB).

The logical volume 'Macintosh HD' (967.8 GB) spans disk0s2 and disk1s2. This is the first 'Macintosh HD' in picture 1. The volume 'Macintosh HD' - it's the one visible on the desktop - should ideally also have about 967.8 GB. This is the second 'Macintosh HD' in picture 1.
In fact it has only 852.67 GB (see picture 3).

In the second picture the logical volume 'Macintosh HD' is the first listed in black, the volume 'Macintosh HD' is the second listed in black, the other two 'Macintosh HD's listed in grey are the parts of your SSD and HDD dedicated to the logical volume 'Macintosh HD'.

In my opinion something went wrong after deleting various partitions with the Bootcamp Assistant/Disk Utility or in Windows.

Preparation:

Detach any external drive (especially your external Time Machine backup drive)
Restart to Internet Recovery Mode by pressing alt cmd R at startup.
The prerequisites are the latest firmware update installed, either ethernet or WLAN (WPA/WPA2) and a router with DHCP activated.
On a 50 Mbps-line it takes about 4 min (presenting a small animated globe) to boot into a recovery netboot image which usually is loaded from an apple/akamai server.

I recommend ethernet because it's more reliable. If you are restricted to WIFI and the boot process fails, just restart your Mac until you succeed booting.

Alternatively you may start from a bootable installer thumb drive (preferably Mavericks or Yosemite) or a thumb drive containing a full system (preferably Mavericks or Yosemite).

Now you may either repair CoreStorage or rebuild your Fusion Drive:

'Repair CoreStorage' (not recommended):

First i would try to check the volume 'Macintosh HD' with Disk Utility. If the volume is corrupted consider a reinstall of Mac OS X.
If the volume is ok quit Disk Utility
Open Terminal and enter diskutil unmountDisk /dev/LVIdentifier and both diskutil unmountDisk /dev/DiskContainingApple_CoreStorageIdentifier
In your case: first diskutil unmountDisk /dev/disk3 then diskutil unmountDisk /dev/disk0 and diskutil unmountDisk /dev/disk1
remove the EFI NO NAME partition with gpt remove -i IndexNumberOfEFINoName DiskIdentifier:
gpt remove -i 4 disk1
Remount the CoreStorage disks and then the Logical Volume:
In your case: first diskutil mountDisk /dev/disk0 and diskutil mountDisk /dev/disk1 and then diskutil mount /dev/disk3.

enter gpt -r -vvv show /dev/diskIdentfierOfApple_CoreStorage to get infos of your HDD CoreStorage disk.
In your case: gpt -r -vvv show /dev/disk1
It should look like this:

-bash-3.2# gpt -r -vvv show /dev/disk1
gpt show: /dev/disk1: mediasize=1000204886016; sectorsize=512;         blocks=1953525168
gpt show: /dev/disk1: PMBR at sector 0
gpt show: /dev/disk1: Pri GPT at sector 1
gpt show: /dev/disk1: GPT partition: type=C12A7328-F81F-11D2-BA4B-00A0C93EC93B, start=40, size=409600
gpt show: /dev/disk1: GPT partition: type=53746F72-6167-11AA-AA11-00306543ECAC, start=409640, size=1671210848
gpt show: /dev/disk1: GPT partition: type=426F6F74-0000-11AA-AA11-00306543ECAC, start=1671620488, size=1269760
gpt show: /dev/disk1: Sec GPT at sector 1953525167                               
     start          size  index contents                                        
         0             1        PMBR                                            
         1             1        Pri GPT header                                  
         2            32        Pri GPT table                                   
        34             6
        40        409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
    409640    1671210848      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1671620488       1269760      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1672890248     280634887
1953525135            32        Sec GPT table
1953525167             1        Sec GPT header

The free space on your HDD has 280634887 blocks. Please calculate the biggest block number dividable through 8. That's 280634880 blocks (á 512 bytes) which equals 143685058560 B or ~143.7 GB. Add the size of your HDD CoreStorage Physical Volume (852666400768 B) The result is 143685058560 B + 852666400768 B = 996351459328 B
Resize your HDD CoreStorage physical volume with diskutil cs resizeDisk HDDPVUUID newsize
In your case: diskutil cs resizeDisk 93892BE8-2B7F-4ABD-A4C3-984495DCD98D 996351459328b
Calculate the maximal size of your CoreStorage Logical Volume in diskutil cs list: (size disk0s2) + (size disk1s2) In your case that's 120988852224 B + 996351459328 B = 1117340311552 B. That should be the size of your refreshed Logical Volume Group.
Resize your Logical Volume with diskutil cs resizeVolume LVUUID LVGSize-128 MB In your case that's diskutil cs resizeVolume D237FFDC-7DA4-41D7-AC13-4CC7E5E8C0A0 1117212311552b. If you get an error (There is not enough free space...) choose a smaller size like 1117148311552b.
Quit Terminal and open Disk Utility.
Check your expanded CoreStorage Volume for errors.
Quit Disk Utility, choose your CS volume as startup disk and restart your Mac

'Rebuild Fusion Drive' (recommended if you have a Time Machine backup)

Booted to Internet Recovery Mode open Utilities → Terminal in the menubar and enter:
diskutil cs list to get the CoreStorage listing.
Copy the Logical Volume UUID, it's the fifth listed.
Now delete the Logical Volume with diskutil cs deleteVolume LVUUID.
In your case: diskutil cs deleteVolume D237FFDC-7DA4-41D7-AC13-4CC7E5E8C0A0.
Copy the Logical Volume Group UUID, it's the first listed in the listing of diskutil cs list.
Then delete the Logical Volume Group with diskutil cs delete LVGUUID.
In your case: diskutil cs delete 1EFE58BC-3613-44C4-86EE-D816F3B66E3E
Enter exit and quit 'Terminal'
Open 'Disk Utility'. Enter 'Ignore' if you are asked to fix the drives.
Choose your SSD and partition it: 1 Partition Mac OS X Extended (Journaled), hit the Options button and choose GUID Partiton table and hit OK and Apply.
Please check that the size is ~121 GB

Example:
Choose your HDD and partition it: 1 Partition Mac OS X Extended (Journaled), hit the Options button and choose GUID Partiton table and hit OK and Apply.
Please check that the size is ~1 TB

Example:
Quit Disk Utility and open Terminal
Enter diskutil list

Example (your disk identifiers and sizes are different of course: Your volume SSD probably has the Identifier disk0s2 and the size 121 GB and your volume HDD probably has the Identifier disk1s2 and the size 1.0 TB):
Enter diskutil cs create "Name" IdentifierSSD IdentifierHDD
In your case probably diskutil cs create "Macintosh HD" disk0s2 disk1s2.

Copy the resulting LVGUUID

Example:
Enter diskutil cs CreateVolume LVGUUID jhfs+ "Macintosh HD" 100%.

Example:
Enter diskutil cs list
Check the size of your Logical Volume. It should have the size ~1.121 TB

Example:
Quit Terminal
Open 'Disk Utility' and check your newly created volume for errors
Quit 'Disk Utility'
Attach your external Time Machine backup drive or check this answer if you use NAS or another network share.
Open 'Restore from Time Machine Backup'
Choose the appropriate Time Machine backup and restore your system
Reboot to your restored system.
Unmount and detach your Time Machine backup drive
Open 'Terminal' and enter 'diskutil list'
Check if your 'Recovery HD' is listed.
If your 'Recovery HD' is missing, usually reinstalling your current system with the latest available system installer (e.g. 'Install OS X Mavericks (10.9.5)' if Mavericks is currently installed) will recreate it without loosing any data. AFAIK Recovery Partition Creator 3.8 will NOT create a Recovery HD on CoreStorage volumes.
After reinstalling the system with the latest available system installer open App Store and install the latest security fixes.

Best Answer

Related Solutions

MacOS – Can’t modify partitions

I think I messed up the Fusion Drive on the 1TB iMac (with BootCamp)

Related Question