MacOS – MacBook startup sound loop

bootmacbook promacosmojavestartup

I have a mid 2012 MacBook Air and it is looping on startup sound, stuck on white screen.

I have tried:

  • formatting the SSD and installing the latest version of macOS Mojave
  • resetting NVRAM and SMC

Neither of the above worked and my MBA is still looping on the startup sound.

However, if I try booting up from the same SSD on another MacBook it boots fine from it.

How may I troubleshoot this further?

Best Answer

Since you've already reset both the NVRAM and SMC and established the SSD is capable of booting another MacBook, I'd try testing your MacBook Air hardware.

Run Apple Hardware Test

Your model of MacBook Air uses Apple Hardware Test. To use this, follow these steps:

  1. Shut down your MacBook Air
  2. Restart your MacBook Air
  3. Press and hold the D key before the gray startup screen appears.
  4. After a while, Apple Hardware Test (AHT) will start.
  5. When prompted, select your language and click the right arrow.
  6. When the AHT console appears, you can choose to run Basic tests by clicking the Test button. However, I suggest you select the "Perform extended testing" checkbox before you click the Test button.
  7. Your test results will appear in the window in the bottom-right of the console.

Note 1: that the extended test will take some time. Take a note of the results and report back.

Note 2: If pressing and holding the D key at Step 3 doesn't work, start again at Step 1 and, at Step 3 press and hold both the OptionD keys instead. This will try and run diagnostics from the internet instead, so you will need to allow more time for it to complete.

Once complete, let us know your results.

Related Question