The Delay is due to postfix doing a reverse lookup on the client IP and doing another lookup on that result to see if they get back to the IP.
if you are using a consumer connection to the internet most likely the first test will pass. but the second test will cause the problem.
you can verify this on the server itself.
nslookup <your client IP>
returns something like 80-41-90-213.dsl.iwx.uk.net
but on reversing that
nslookup 80-41-90-213.dsl.iwx.uk.net
you will probably get SERVFAIL after a delay.
it is that delay that is showing up when you connect to the server.
To find out which one go through each server in /etc/resolve.conf
nameserver x.x.x.x
nameserver y.y.y.y
nameserver z.z.z.z
test them with
nslookup 80-41-90-213.dsl.iwx.uk.net x.x.x.x
One or more will show a delay before they come back to the command prompt.
Once you've found which DNS causes the big SERVFAIL delay, replace it with another. i.e. Googles 8.8.8.8 and 8.8.4.4 currently return relatively quickly.
Issue solved; no physical errors.
These are what I did:
First I analyzed where the error occurred :
...
** Checking catalog file.
Invalid index key
(4, 20220)
Invalid node structure
(4, 38065)
The volume SSD could not be verified completely.
...
fsck
stops while scanning catalog files. Let's try reading fsck_hfs
user manual by executing man fsck_hfs
for clues.
...
-R flags Rebuilds the requested btree. The following flags are supported:
a Attribute btree
c Catalog btree
e Extents overflow btree
...
Let's try rebuilding catalog btree then. fsck_hfs -Rc /dev/rdisk0s2
Results: fsck
does not stop at catalog file check anymore, and the Invalid index key
error disappeared, revealing more errors ( clues! ).
** Checking extents overflow file.
Incorrect block count for file Cache.db-wal
(It should be 114 instead of 119)
** Checking catalog file.
Missing thread record (id = 30291961)
Incorrect number of thread records
Incorrect number of thread records
** Checking multi-linked files
** Checking catalog hierarchy.
Invalid directory item count
(It should be 221 instead of 244)
Invalid volume file count
(It should be 1318081 instead of 1318117)
** Checking extended attributes file.
Invalid node structure
The volume SSD could not be verified completely.
fsck
now stops when checking extended attributes file. Let's try rebuilding the attributes btree with fsck -Ra /dev/rdisk0s2
.
Result(s): All errors, except Invalid node structure
disappeared after the first repair attempt. It shows several invalid nodes, then attempts the second repair, and rechecks. It still shows some invalid nodes, but even less then before.
However the fsck
stops with a message saying that it stops making repair attempts after 3 check failures. I ran fsck -Ra /dev/rdisk0s2
again. It attempts to repair again, then rechecks. No invalid node structure error shows up!
It now makes Invalid volume free blocks count
, Invalid volume file count
, and Invalid volume directory count
errors, but it doesn't stop yet!
After yet another attempt of repair, fsck
finished without any errors.
Shut down. Boot normally without entering single user mode. And it works!
Problem solved by running fsck
several times, rebuilding catalog btree, and attribute btree several times.
Best Answer
I had AirServer installier which uses port 5000. It won't be started in safe mode.