MacOS – Cannot delete partition (minus greyed out) – non-encrypted, no core storage

bootcampdisk-utilitymacospartition

When trying to install Windows 10 from scratch on my Late 2013 MacBook Pro, I was unable to remove the old BOOTCAMP partition through the Boot Camp Assistant. I erased the partition with Disk Utility, but was unable to join it with my main partition. Now when I run Boot Camp Assistant, I get the following message: "The startup disk cannot be partitioned or restored to a single partition."

Running diskutil core storage list returns: No CoreStorage logical volume groups found

Additionally, FileVault is turned off.

I can add new partitions to the drive manually and delete them, but every time I try to resize the main partition it adds a new Untitled partition that is not deleteable (minus button is greyed out). Any ideas?

$ sudo gpt -r show /dev/disk0
      start       size  index  contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6         
         40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640  244140624      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
  244550264    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
  245819800       1640         
  245821440   10921976      4  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
  256743416     262144         
  257005560   10920264      5  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
  267925824     262144         
  268187968  221784600      6  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
  489972568     262151         
  490234719         32         Sec GPT table
  490234751          1         Sec GPT header

Best Answer

Ok, I figured out an alternative method - I was able to combine the partitions using the diskutil mergePartitions command (e.g. diskutil mergePartitions JHFS+ MacHD disk0s2 disk0s4). Hope that helps anyone else with the same issue!

Related Solutions

Can’t mount (Core Storage) encrypted volume anymore

Not sure if this will be helpful, but I just wrote a script to unlock and mount a core storage Encrypted Disk like yours for myself. I had the same problem where I could get the disk unlocked, but not mounted. I finally realized that I needed a command to mount it after it was unlocked.

In terminal, you first have to unlock the Encrypted Disk and then you can mount it with a separate command. For you, that would look something like this:

diskutil cs unlockVolume E2DB4126-C04C-4AE1-B1AC-CDFF0218D537 -stdinpassphrase

You will be prompted for the password to the Encrypted Disk. After this, your drive will be in an unlocked and unmounted state, so you still need to mount it with this command:

diskutil mount E2DB4126-C04C-4AE1-B1AC-CDFF0218D537

In case you were wondering, E2DB4126-C04C-4AE1-B1AC-CDFF0218D537 is the UUID of the disk you want to mount. I'm no scripting or CoreStorage pro, but your problem seemed similar to mine, so I hope this can help you. I got all this info from the diskutil man page if you run into any problems.

I think I messed up the Fusion Drive on the 1TB iMac (with BootCamp)

Theoretically everything is fine with your Fusion Drive. Fusion Drives look like this. Disk0 is your SSD with 121 GB and disk1 is your HDD with ~1 TB (~1.121 TB summed up).

The larger parts of your SSD (disk0s2) and your HDD (disk1s2) are pooled to a CoreStorage LVG (Fusion Drive: disk3) with a size of 967.8 GB. The rest is reserved for EFIs, a Recovery HD (alltogether ~1.3 GB) and your old Windows partition - now probably free space (~152 GB).

The logical volume 'Macintosh HD' (967.8 GB) spans disk0s2 and disk1s2. This is the first 'Macintosh HD' in picture 1. The volume 'Macintosh HD' - it's the one visible on the desktop - should ideally also have about 967.8 GB. This is the second 'Macintosh HD' in picture 1.
In fact it has only 852.67 GB (see picture 3).

In the second picture the logical volume 'Macintosh HD' is the first listed in black, the volume 'Macintosh HD' is the second listed in black, the other two 'Macintosh HD's listed in grey are the parts of your SSD and HDD dedicated to the logical volume 'Macintosh HD'.

In my opinion something went wrong after deleting various partitions with the Bootcamp Assistant/Disk Utility or in Windows.

Preparation:

Detach any external drive (especially your external Time Machine backup drive)
Restart to Internet Recovery Mode by pressing alt cmd R at startup.
The prerequisites are the latest firmware update installed, either ethernet or WLAN (WPA/WPA2) and a router with DHCP activated.
On a 50 Mbps-line it takes about 4 min (presenting a small animated globe) to boot into a recovery netboot image which usually is loaded from an apple/akamai server.

I recommend ethernet because it's more reliable. If you are restricted to WIFI and the boot process fails, just restart your Mac until you succeed booting.

Alternatively you may start from a bootable installer thumb drive (preferably Mavericks or Yosemite) or a thumb drive containing a full system (preferably Mavericks or Yosemite).

Now you may either repair CoreStorage or rebuild your Fusion Drive:

'Repair CoreStorage' (not recommended):

First i would try to check the volume 'Macintosh HD' with Disk Utility. If the volume is corrupted consider a reinstall of Mac OS X.
If the volume is ok quit Disk Utility
Open Terminal and enter diskutil unmountDisk /dev/LVIdentifier and both diskutil unmountDisk /dev/DiskContainingApple_CoreStorageIdentifier
In your case: first diskutil unmountDisk /dev/disk3 then diskutil unmountDisk /dev/disk0 and diskutil unmountDisk /dev/disk1
remove the EFI NO NAME partition with gpt remove -i IndexNumberOfEFINoName DiskIdentifier:
gpt remove -i 4 disk1
Remount the CoreStorage disks and then the Logical Volume:
In your case: first diskutil mountDisk /dev/disk0 and diskutil mountDisk /dev/disk1 and then diskutil mount /dev/disk3.

enter gpt -r -vvv show /dev/diskIdentfierOfApple_CoreStorage to get infos of your HDD CoreStorage disk.
In your case: gpt -r -vvv show /dev/disk1
It should look like this:

-bash-3.2# gpt -r -vvv show /dev/disk1
gpt show: /dev/disk1: mediasize=1000204886016; sectorsize=512;         blocks=1953525168
gpt show: /dev/disk1: PMBR at sector 0
gpt show: /dev/disk1: Pri GPT at sector 1
gpt show: /dev/disk1: GPT partition: type=C12A7328-F81F-11D2-BA4B-00A0C93EC93B, start=40, size=409600
gpt show: /dev/disk1: GPT partition: type=53746F72-6167-11AA-AA11-00306543ECAC, start=409640, size=1671210848
gpt show: /dev/disk1: GPT partition: type=426F6F74-0000-11AA-AA11-00306543ECAC, start=1671620488, size=1269760
gpt show: /dev/disk1: Sec GPT at sector 1953525167                               
     start          size  index contents                                        
         0             1        PMBR                                            
         1             1        Pri GPT header                                  
         2            32        Pri GPT table                                   
        34             6
        40        409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
    409640    1671210848      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1671620488       1269760      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1672890248     280634887
1953525135            32        Sec GPT table
1953525167             1        Sec GPT header

The free space on your HDD has 280634887 blocks. Please calculate the biggest block number dividable through 8. That's 280634880 blocks (á 512 bytes) which equals 143685058560 B or ~143.7 GB. Add the size of your HDD CoreStorage Physical Volume (852666400768 B) The result is 143685058560 B + 852666400768 B = 996351459328 B
Resize your HDD CoreStorage physical volume with diskutil cs resizeDisk HDDPVUUID newsize
In your case: diskutil cs resizeDisk 93892BE8-2B7F-4ABD-A4C3-984495DCD98D 996351459328b
Calculate the maximal size of your CoreStorage Logical Volume in diskutil cs list: (size disk0s2) + (size disk1s2) In your case that's 120988852224 B + 996351459328 B = 1117340311552 B. That should be the size of your refreshed Logical Volume Group.
Resize your Logical Volume with diskutil cs resizeVolume LVUUID LVGSize-128 MB In your case that's diskutil cs resizeVolume D237FFDC-7DA4-41D7-AC13-4CC7E5E8C0A0 1117212311552b. If you get an error (There is not enough free space...) choose a smaller size like 1117148311552b.
Quit Terminal and open Disk Utility.
Check your expanded CoreStorage Volume for errors.
Quit Disk Utility, choose your CS volume as startup disk and restart your Mac

'Rebuild Fusion Drive' (recommended if you have a Time Machine backup)

Booted to Internet Recovery Mode open Utilities → Terminal in the menubar and enter:
diskutil cs list to get the CoreStorage listing.
Copy the Logical Volume UUID, it's the fifth listed.
Now delete the Logical Volume with diskutil cs deleteVolume LVUUID.
In your case: diskutil cs deleteVolume D237FFDC-7DA4-41D7-AC13-4CC7E5E8C0A0.
Copy the Logical Volume Group UUID, it's the first listed in the listing of diskutil cs list.
Then delete the Logical Volume Group with diskutil cs delete LVGUUID.
In your case: diskutil cs delete 1EFE58BC-3613-44C4-86EE-D816F3B66E3E
Enter exit and quit 'Terminal'
Open 'Disk Utility'. Enter 'Ignore' if you are asked to fix the drives.
Choose your SSD and partition it: 1 Partition Mac OS X Extended (Journaled), hit the Options button and choose GUID Partiton table and hit OK and Apply.
Please check that the size is ~121 GB

Example:
Choose your HDD and partition it: 1 Partition Mac OS X Extended (Journaled), hit the Options button and choose GUID Partiton table and hit OK and Apply.
Please check that the size is ~1 TB

Example:
Quit Disk Utility and open Terminal
Enter diskutil list

Example (your disk identifiers and sizes are different of course: Your volume SSD probably has the Identifier disk0s2 and the size 121 GB and your volume HDD probably has the Identifier disk1s2 and the size 1.0 TB):
Enter diskutil cs create "Name" IdentifierSSD IdentifierHDD
In your case probably diskutil cs create "Macintosh HD" disk0s2 disk1s2.

Copy the resulting LVGUUID

Example:
Enter diskutil cs CreateVolume LVGUUID jhfs+ "Macintosh HD" 100%.

Example:
Enter diskutil cs list
Check the size of your Logical Volume. It should have the size ~1.121 TB

Example:
Quit Terminal
Open 'Disk Utility' and check your newly created volume for errors
Quit 'Disk Utility'
Attach your external Time Machine backup drive or check this answer if you use NAS or another network share.
Open 'Restore from Time Machine Backup'
Choose the appropriate Time Machine backup and restore your system
Reboot to your restored system.
Unmount and detach your Time Machine backup drive
Open 'Terminal' and enter 'diskutil list'
Check if your 'Recovery HD' is listed.
If your 'Recovery HD' is missing, usually reinstalling your current system with the latest available system installer (e.g. 'Install OS X Mavericks (10.9.5)' if Mavericks is currently installed) will recreate it without loosing any data. AFAIK Recovery Partition Creator 3.8 will NOT create a Recovery HD on CoreStorage volumes.
After reinstalling the system with the latest available system installer open App Store and install the latest security fixes.

Best Answer

Related Solutions

Can’t mount (Core Storage) encrypted volume anymore

I think I messed up the Fusion Drive on the 1TB iMac (with BootCamp)

Related Question