MacBook – use 4k Dell P2715Q monitor with Thunderbolt 27“ on the Retina MacBook Pro 13” (late 2013)

I'm going to start off backwards. 4k Display will require some sort of cable, wether DVI, Display port, or Thunderbolt that is from manufacturer to manufacturer and model to model different. According to the tech specs of 4K it is compatible with Display port 1.2.

According to : http://www.apple.com/macbook-pro/specs-retina/

"Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, both at millions of colors"

This could however simply be that Apple has only tested it on displays with that resolution and once 4k displays are out in the real world people can test it.

So your MBP Retina can support 2 external displays and the use of the the clamshell display at the same time. Those external display can be attached via HDMI and Thunderbolt (adapters) or both via Thunderbolt adapters. But so far the tech specs limit the resolution to 2560x1600. It could also be that the resolution output could be enhanced with a software update (firmware update) at a later time.

Archived Specifications page:

• MacBook Pro (Retina, 15-inch, Late 2013) - Technical Specifications
• Other MacBook Pro models.

You ABSOLUTELY can do this.

The statement on the box is wrong. You can use either two mini-display port to displayport cables, or two Thunderbolt cables.

My statement was based on the fact that you can (according to Apple's documentation) run two Thunderbolt monitors on that laptop, and the available resolution on the Thunderbolt cable is clearly capable of 3440x1440.