MacBook SSD replacement — sudden motion shock sensor in optical bay

hard drivehardwaremacbook prossdupgrade

When looking to upgrade a MacBook Pro with a solid state drive (SSD), one option is to:

At present, many websites (if not most) suggest to do it this way. However, I am concerned about the safety to the spinning HDD (hard disk drive) when in the SuperDrive slot.

The main bay has a sudden-motion-sensor (SMS). It is an accelerometer that detects when the MacBook is falling and prevents damage to the HDD as it is spinning by retracting the reader arm that could scratch the hard disk — damaging/corrupting data.

Although the SuperDrive bay may have the same SATA connector as the main bay (depends on the year of your machine, some have a combination of SATA II and III), it is suggested that it may not have an SMS, which can be a pretty serious issue:

Why not install the SSD in the regular hard drive bay? Good idea! The
only problem is that the regular hard drive bay is the only bay that
features sudden motion protection
. If you drop your MacBook, it’s
smart enough to safely park your non-SSD hard drive so it won’t be
damaged by the impact. The optical bay interface has no such feature.
This is harmless to your … SSD because it has no moving parts,
but any spinning platter-based drive [HDD] will be at risk if installed in
the optical bay
.

You can have it both ways if your secondary hard drive has its own
native sudden motion detection
(the … factory-installed MacBook hard
drive [does not]
).

But posts on a forum suggest otherwise.

Which do we believe?


If the optical bay lacks the shock sensor, then it would likely be better to leave the HDD where it is, and install the SSD in the optical bay, but this method seems to have an issue with waking from hibernation and sleep.

Best Answer

Some drives have the sudden motion sensor (SMS) built-in. On my 2011 15" Macbook Pro the Toshiba drive has it built-in. I can confirm this because when I simulate a 'drop' I can hear the drive heads park. When I disable SMS through Trim Enabler and do the drop, there is no clicking.

My Toshiba sits in the opti-bay. My SSD sits in the drive bay.

I am reporting severe battery drain (I still keep my user data on my Toshiba drive) and it seems my macbook is heating up more too -- Diablo 3 and SC2 FPS is dropping when my fans are going full blast. I don't recall that happening before the opti-bay upgrade.