MacBook – Increasing USB port Power Output

It's difficult to tell if you have a hardware issue or this is just how things are designed.

Have you read through this article on how Apple detects the first device that requests higher power and enables that power on some, but not all ports?

• Apple Computers and Displays: Powering peripherals through USB

I know you have linked to it, but the 500 mA is subject to measurement errors on the computer side - so plugging in a device can draw more current than the device says it should. Similarly, the measurement side where the Mac determines the actual power draw could be flakey or failing. This sort of thing isn't tested in the system diagnostics. You would need a test set / oscilloscope / engineering lab to really measure these currents with enough resolution to pin down exactly what is happening.

It could be just the order in which the system decides to detect a device attached. Once you have ruled that out and have a repeatable issue - you might need to have the Mac checked for service if it isn't producing power as expected. Now that you know that the order in which devices are plugged can affect things, perhaps this will help narrow down if the enhanced power is correctly available to some (changeable) subset of the ports and hubs made by Apple.

There is no easy answer other than being precise and narrowing down exactly which devices are causing errors and statistically determining/isolating whether it's the devices or the port that is out of spec and needs to be replaced.

A few years late, but something like this will help.

SinLoon-Enhancer Y splitter Hub Adapter Cable-Female-Charge-Extension

It's a Dual Male USB Cable, one of the male connectors are for power, the other for power + data. It should give you a full 1AH with the power connectors from both USB ports, assuming your hub can output more than 500mah total.