IPad displays “Not Charging” when plugged into USB ports. What can I do

chargingipadpowerusb

When I plug my iPad into my computer's USB ports, the iPad battery area displays "Not Charging".

I understand the iPad requires more wattage to charge compared to an iPhone or iPod, as evidenced by the iPad's larger power adapter (10W) vs the iPhone's (5W).

Is there anything I can do to enable iPad charging from my computer's USB ports? The computer in question is a desktop PC, and it has a 950W power supply. I presume the motherboard's own USB ports are the issue, as opposed to overall power available 🙂

So I'd like to know:

  • Are there external USB hubs that can supply enough power to charge the iPad?

  • Is there any other solution to enable a computer's USB ports to charge an iPad?
    e.g. doubling up a USB port, as I've seen done with some external hard drive enclosures?

Best Answer

From the article, The iPad's USB charging caveat:

[Originally posted on Neowin.net by giga on 04 April 2010 12:26]

The iPad specifications page clearly state the ability to charge with USB (with no mention of OS requirements) but Apple have additionally provided a support document disclosing that "some USB 2.0 ports and accessories do not provide enough power to charge iPad."

Providing some further clarification to Macworld, Apple asserts that USB charging is supported but that it varies according to the state of the iPad and the power output of the USB hub:

  • For the fastest charging, use the iPad’s included 10-Watt USB power adapter. This will fully charge the iPad in a few hours, even if you’re using the iPad at the same time.
  • When connected to a high-power USB port—such as the ones on recent Macs and the iPhone Power Adapter—the iPad will charge, even during use, but more slowly. (We haven’t yet determined how much more slowly.) Some third-party powered USB hubs provide higher-power USB ports, but many don’t; similarly, the USB ports on most Windows PCs don’t provide this additional power.
  • When connected to lower-power USB ports—those on older Macs, most Windows PCs, and most USB hubs (powered or unpowered)—the iPad’s battery is not charged while the iPad is awake, but is charged (again, slowly) when the iPad is asleep. What’s confusing here is that the message "Not charging" appears in the menu bar when the iPad is awake, which might lead you to assume that the offending USB port can never charge your iPad. But rest assured, Apple says: once you put the iPad to sleep, the battery will indeed charge. (If you could see the screen while the iPad was asleep, it might even display the charging icon. It’s the modern-day “Does the refrigerator light stay on when I close the door?” mystery.)

Further analysis from Apple's statements indicate that the iPad can only be charged off of USB connections that provide near 1 amp of current. The majority of USB ports on most older Macs and PCs only provide 500 mA and thus can't be used to charge the device.

The USB 2.0 specification provides 500 mA of current to high-powered buses and 100 mA for low-powered buses. But in April 2009, the specification gained a new "Battery Charging Specification" which provided additional current to high power devices and it seems that Apple has started to incorporate it in their newer Macs.

Related Question