Imac mid 2011 – GPU dead, need to replace, can i swap the 2gb for a 1gb

gpuimac

new to the forum and fixing my own imac.

My mid 2011 – recently crapped out, suspect it's the video after much reading online.

I'm running a 3.4ghz, i7, 16 gb 1333 mhz ddr3 / Amd radeon HD 6970M 2048mb

So looking around to replace the 6970m, (the 2gbs are pretty pricey) so if i dropped in a 1024 or 1gb version would it just run a bit slower or would it have other issue?

Any suggestions would be greatly appreciated.
thank you in advance
John

Best Answer

Short answer

Yes, you can swap the 2GB Radeon HD 6970M for the 1Gb version and will probably not even notice the difference (depending on what you're using your iMac for).

Long answer

Since you're comfortable enough fixing your own iMac, and you'd have to get to the GPU anyway to replace it, I wouldn't replace the GPU at all. Instead I'd try fixing it by reflowing the solder. To do this, you need to:

  1. Disassemble the iMac enough to remove the GPU
  2. Set your home oven to 205℃ (400℉)
  3. Place a sheet of baking paper on an oven tray and place the GPU (only the GPU itself) on the oven tray
  4. Place it in the oven for 8 minutes
  5. Remove the tray and let it cool
  6. Remove any old heatsink compound from the chips and replace with new compound
  7. Reassemble everything

Depending on how familiar you are with disassembly/assembly, I'd allow anywhere between 3hrs to most of the day for doing this. Also, you will require some tools, but if you don't have these you can easily purchase them online.

Related Question